Okay guys heres your chance. I have about 8 sets of HID's for sale.. You will have to custom fit them by purchasing some of the H4 Sets of ebay, But these are the real deal.
They are OEM for the Cadillac Escalade. I have sets in both of my vehicles...
IM selling the kits for $300 CAD Plus Shipping.
If you wanna buy some lemme know they will go fast,m and MAN are they ever bright!
PM me for details or purchasing info. First come first serve basis.. Money talks.
do you have them on your 3gee? if so, pics would be great.
of the lights alone, how you fit everything in place, etc...
people will be more likely to buy if they see an example of a finished product.
and the kit comes with everything but houseing? ballests, bulbs, lenses, etc.
thanks.
I dont have a "how to" So to speak. No I dont have them on my 3Gee, Beucase I havent had the time to order the Housing off ebay. But yes EVERYTHING is included in the kit but the housing... I have a pic of them in my intrepid?
lets see em on the intrepid then. either way its interesting to see them on different cars that didnt come with them.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
HIDs look very very nasty in the H4 diamond housings. Way too much glare even with shields. I tried to sell a complete set here for $200 with the glare shields a while back but nobody wanted it.
Hella ECE H4 housings are a different story but those are pretty pricey. That or projectors is the only way to go.
[QUOTE=HondaBoy]lets see em on the intrepid then. either way its interesting to see them on different cars that didnt come with them.[/QUOTEOkay here we go
]I dunn ohow to put pics in?
so waht all is includeed in the hid pic and how do u knwo it wil work wil i still be able to clsae my lights and they wil fit in my h4 conversion light
rhd restoration 2nd gen prelude
looks like he probably just has the ballast+ bulbs for sale. You still need an h4 adapter to use with our housings. Casper shields are the best adapters for our cars that hold the d2s or d2r capsules firmly.
To do the HID's right you should use a projector that has a cut off shield. Otherwise you will end up blinding people with a retrofit H4 housing. I started to build a retrofit with Audi A6 projectors, Ballasts, and bulbs but sold it when i needed money. Here is as far as i got.
My problem was copensating for the longer projectors which extended the H4 housing about an inch plus you need room for the ballast connector. I might try to do it again if i can track down the supplies from the dealership i use to work for. They definatly are nice but the downfall are the loss of highbeams unless i can find a bi-xenon projector that is not so long. I had a set but they were longer than the regular A6 projetors that had a independent high beam.
So if you hand this is a good project but it takes time and patience for a nice end result.
I don't know anything about lighting, but I can certainly visualize what you are saying about them being too long for us to use in the flip up housing. Are all HID projectors that long? I've never measured it, but just how much room do we have to work with in our housings?
"Feed their greed with your need for speed"
we have about 5 -6 inches or so.. Typical HID Projectors are around 6.5 inches
Well, unless you just have to have brighter headlights, I'd just go with the HID fog lights:
http://www.autoaccessorystore.com/ho...id=7&sec_id=45
Then you don't have to worry about all that custom work, but should have plenty illumination when you want it. I suppose you could even mount these in our housings; they sure seem shorter in the pics (?).
"Feed their greed with your need for speed"
I could probably make the A6 single beam ones work for sure but the ideal setup is bi-xenon ones. I know the Audi TT projectors are shorter but also a single beam the S4 ones might be a better length and are bi-xenon if i remember right. Im sure there are some out there you just have to find them. The problem is most european cars use the same vendors such as Hella for the ballasts etc. So you would have to search other brand cars for some parts.
that seems like a very nice mod.. Get final pics up when its done
Posting Permissions
Reply With Quote
Bookmarks