The What's Your Suspension Consist of thread

[ghettogeddy]

lets here what u got, and if its custom what it took to get in there.
please no off topic posts. if u have questions please pm or start a dif thread for that. all i want is one post per person, (unless its an update) and that post must contain strut brand/type, spring brand/type and anything that u had to do to make it fit please include model and year of parts even if it is a 3g part
also u may include pic's of the setup and final stance
ill go first

Strut
Tokico Hb blue for 86-89 accord front and rear

Springs
Drop zone sport coilover for a 00 civic

mic
3" plumbers floor flange in rear to keep the perch level

rear strut pic
u cant really see the flange but ill post a pic of one


flange


front strut pic


coil overs at lowest setting

[knarg]

My setup is:

Front:
Koni Specials (Reds)
Ground Control Coilovers @ 3.25" drop
DC Strut Bar

Rear:
Koni Specials (Reds)
Ground Control Coilovers @ 3.25" drop
Suspension Techniques Rear Sway Bar

Pic of rear suspension when I got them, fronts are similar:

[Hauntd ca3]

i have
kyb factory rate shocks front and rear
king springs low springs( 35mm drop) front and rear
have a set of urethane bushes on the way
The springs give me a ride height of about 120mm to the chassis rails

[MessyHonda]

if i told you i would have to kill you.

[ZackieDarko]

tokico blues with sprint 2.25" springs

everything else is OEM

[Bones]

89 Accord LX-i with 1.5 inch drop H&R springs, Tokico HP struts, and a Vigor rear sway bar. (really dirty front end tho)


H&R Springs - 1.5 inch drop (86-89 Accord)


Tokico HP (86-89 Accord)


Vigor rear sway bar (92 Acura Vigor)


Quote added to existing post so thread is not cluttered with off topic posts.

they (wheels) are from a bmw i have four of them i got from the junkyard for 150 with one decent tire lol. i'm sanding and painting mine to match my crx search google with this exact quote

"honda-tech bottlecaps"

you'll see how awesome they are. especially on an older car like the 3g.

I been considering painting my BMW bottlecaps but wasn't sure how it'd look. Now that I've seen that thread on honda-tech I've been inspired.

[2drSE-i]

Koni Specials and Tokico 1" Drop Springs all four corners

ST Sway bars, Front and Rear

Justins Front Strut Bar

Prothane Polyurethane Bushings, Front Lower Shock Bushings, Front Lower Control Arm Bushings, Front Radius Rod Bushings.

[87LXiR]

FRONT

Coils: Eibach pro kit springs
Strut: Oem replacments
Sway Bar: SEi swaybar (22.5mm)
Bushings: All OEM minus sway bar bushings and endlinks. Those are PST polygraphite bushings

REAR

Coils: OEM
Struts: Tokico Blues
Sway Bar: Vigor sway bar (16mm)
Bushings: All OEM

Car handles beautifully. I was running Tokico bleus up front on OEM springs but the became worn. I temporarilly replaced them with the eibachs.

[lostforawhile]

right now i have a completly rebuilt factory setup,with mostly moog parts, including urthane lower arm bushings,and radius rod bushings,also rebuilt brakes and arp fasteners and wheel studs. i also made my own sway bar link bushings out of urthane. and an lxi factory sway bar on the rear. i found the center section at a junkyard, and had to order the rest of it. bolts on it are also arp. still need to get thge alignment done though after putting in the new rack and tie rod ends. the wishbones were stripped to bare metal,and epoxied then painted.

[Pico]

Struts Front KYB GR-2
Rear Tokico Blue
Springs H&R 1.5 Drop
Energy Suspension Front Sway Bar and Stabilizer Bushings
Justin Upper Front Strut Bar and Rear Lower Tie Bars

[Legend_master]

Here my suspension thread

[2drSE-i]

so have you found your new hatch yet antares? I would love to come down and help you swap it all over if i can.

[Legend_master]

so have you found your new hatch yet antares? I would love to come down and help you swap it all over if i can.

Nope it's jsut sitting there waiting for the Insurance crap to settle out.

[AccordB20A]

4 X Koni Yellows and 4 X king springs

[bullard123]

tokico blues with sprint 2.25" springs

everything else is OEM

x2

[88LXi68]

Rebuilt, Revalved and Double Adj Konis on all 4 corners
Ground Control Coilovers w/ custome spring rates
Addco Front Sway Bar
ST 4g Rear Sway Bar
DC Front Upper Strut Bar
Turboaccord Rear Upper Strut Bar
2g Prelude Upper Arms
Ingalls Rear Arms

[guaynabo89]

revalved, shortened, externally adjustable koni (4)
sprint 2.25 springs
ingalls rear Upper control arm for camber
ingalls rear adjustable arm for 2000 Accord custom fitted to adjust toe. (lower)
ingalls front camber kit
2nd gen lude arms to get more camber adjustment out of the ingalls.
dc sports front upper bar
88turboaccord rear upper strut bar
suspension techniques front and rear sway bars with poly bushings
moog poly radius arm bushings


runs pretty good

[P|eszczoH]

1.Prelude 3rd gen front spring - bit stiffer
2.Prelude 3rg gen front upper control arm with polybushings - those needs NO MODIFICATION as the 2nd gen ludes needs.
3.oem schocks - but preludes 3rd gen is the same
4.rear stock.

[stat1K]

first 3g i've seen with bottlecaps looks pretty good.

[lostforawhile]

first 3g i've seen with bottlecaps looks pretty good.

what are those from? i like those

[2oodoor]

I like the way that car looks Bones

Those wheels kind of look like 300 series bmw

My suspension, bone stock other than 40 offset wheels 15 inch. .. it needs a lot in that area but I dont throw the car around that much. I plan on a set up pretty much like Ghettogeddy shows

[stat1K]

they are from a bmw i have four of them i got from the junkyard for 150 with one decent tire lol. i'm sanding and painting mine to match my crx search google with this exact quote

"honda-tech bottlecaps"

you'll see how awesome they are. especially on an older car like the 3g.

[1ajs]

mk3gee has these on the front the rest is prity much stock