88 LXi Hatch under the works

[Bglad420]

I ahve a 88 Honda Accord Lxi Hatch with a bunch of goodies to go into it, and more on the way, I'd put pics up but I don't know how yet, I'm sure someone will help me with that part though, Thanks

[gfrg88]

how to post pics

[88accordhb]

you have to have a hosting site first to get the pictures on the web. use www.imageshack.us.

then come here put "[img]" then the url to that pic, then "[/img]" but don't use the quotation marks and no spaces between anything.

[Bglad420]

Lets see if this works.....This is a front shot of my Accord

[88accordhb]

sry try again, give me the url

[Bglad420]

I think I got it, but is there a way to make the pics smaller?

[Bglad420]

MY Accord is and 88 Lxi Hatch, It was a total, and I picked and pulled from my blown up accord to peice it back together so far, I still need a lot of stuff, but thats what I'm here for.
Things that I do have....
*15" '02 Si civic wheels
*Custon short ram intake
*Ceramic coated header
*high-flo cat
*2" drop spings
*Alluminum look gauges
*Bride steering wheel
*JDM corners
*Sei arm rest
*Sedan style bumper, the one with the clear lights
*Carbon fiber hood
*Diamond headlights

[BlueBead]

Nice to see you're pimping the hatch!
I was wondering if those wheels would fit... did you keep the stock tires?
Looking forward to seeing the completed project!

[Bglad420]

Here are some Interior pics, and one of the dirty motor, and some of the parts I have gathered so far.

[Pana23]

nice goin! nice bong too

[Bglad420]

nice goin! nice bong too

That was a factoy option......?!?!?!? LOL

[Legend_master]

That was a factoy option......?!?!?!? LOL

those wheels look good on that car, and I couldent stop laughing when I saw that . Good luck with the ride and welcome to the board.

[frankie89]

me want hatch...

[Bglad420]

Do the Sei rear disc bolt onto the hatch's if so how much work is it and what will I need?

[NXRacer]

thats what the search button is for!

[geesnow]

Looks Good! Nice Mods. My favorite is the bong!

[gfrg88]

lol i didnt notice that bong, it looks good

[PortugalFocus]

You got a good start with the right parts.

I didn't know the new body Si was a 4 lug, I could've sworn it was 5.

[Busted_Blue]

You got a good start with the right parts.

I didn't know the new body Si was a 4 lug, I could've sworn it was 5.

01-02 civic Si were 4x100 and the newer ones are now 5x114.3.

[Bglad420]

I traded my sister my snow tires for those, I just got a carbon fiber hood today!

[NXRacer]

which hood is that??

[acco-R-d]

i got the same riggrd intake. it sounds very throaty under hard acceleration plus a little more throttle response.

[Justin86]

from rags to riches.

[Go90go]

Be careful when installing that cat, the rear-facing flange is off by about 20-30 degrees counter-clockwise. If you've got a cat-back, it'll have to be twisted to fit properly, meaning it'll jut out underneath your car. Best solution is to have an exhaust shop cut the piping in the mid-section and re-weld it after straightening. Also, the bracket with the hangers will have to be flipped backwards so as they will stay on the hooks. The cat is slightly longer than stock but after the reversal of the bracket, it will fit without issue. Don't worry about how the hangers look after you put them on, they will be angled rather severely but it isn't a problem. The ring aroung the horn button on your steering wheel is very soft, as are the hex bolts that come along with it. If you ever need to re-bolt them, do so very carefully as you can easily round them out. If you haven't hooked up the horn button, it will spin, causing you to have to adjust them every once in awhile. Chances are that it'll spin counter-clockwise.

~Cheers~

This is what I mean about the piping sticking out from under the car:

[88accordhb]

effin' sweet dude.