Are there Odometer Lights In our cars?
That's the question I have cause i only have the light coming from above the odometer. So today I tried do the test light thing to figure it and fried something BUT that one light still works so I guess all is not lost! One of the blue wires on the outside of the gauge cluster is cut (there are two I can see as soon as I take off the cluster trim) Any Thoughts?
My wife hates my car but... she can live with it or divorce me!
Originally Posted by Acidbath88accordlx
That's the question I have cause i only have the light coming from above the odometer. So today I tried do the test light thing to figure it and fried something BUT that one light still works so I guess all is not lost! One of the blue wires on the outside of the gauge cluster is cut (there are two I can see as soon as I take off the cluster trim) Any Thoughts?
Not sure what your asking exactly but it is backlite. There should be a thumb wheel to the right of the steering wheel to adjust.
Cut wire is never a good sign.
The top panel like towards the windshiel can also be remove maybe it make it easier to see in there.
wp
can you get a good pic of the cut wire? if i can figure out where its going i'll try to help you.
I can Try but I tried it before and it wouldn't let even following the how-to stuff to post pix
And it might be a crappy pic cause i took it with my camera phone cause i can't find the wife's digital camera...
Ok here goes....
http://img56.imageshack.us/img56/955...rwiring9gh.jpg
Last edited by Acidbath88accordlx; 08-05-2005 at 12:56 PM.
It's still a bad pic... sorry but the black wire i don't think is suppose to be connected to the blue wire. I use a test light on the CUT blue wire and it lit up so I removed the black wire (which is connected to a ground) and checked that blue wire. that also lit up. so I connected the to blue wires together... nothing happened. Connected the CUT blue wire to the ground and POOF smoked! so I just hooked it up the way it was and said F it
Yeah 12v to ground is a dead short. you learned that.
Need to figure out where those wires go they should match up to the same color and be able to reach.
wp
I thought they went together but nothing happened... oh well
are they the two wires that go to the light diffuser over the instruments?
yes they are
give me a little while i'll take a picture of where they are supposed to go.
ok here is a picture of where they go,the two wires go from the diffuser to a special bulb socket. this allows current to go from the bulb socket to the diffuser lights. if you don't have the bulb socket, some of them are soldered to the circuit board.
if you shorted out the wires it's possible that you fried the dimmer controller, it's under the cover that covers the bottom of the steering colum. it's actually attached to the cover. here is a picture. it controls the ground going to the lights, it's pretty easy to fry.
Last edited by lostforawhile; 08-05-2005 at 06:27 PM.
is there some kind of site problem where pics won't load? i know they are posted right. is anyone else having problems tonight?
Well I noticed Some bulbs and holders are missing so I'm going to the boneyard to get them and I'll yank the dimmer control box too....
Posting Permissions
Reply With Quote
Bookmarks