Ahem* Ladies & Gentlemen, prepare to wet your shorts. ***56k Beware***

**invol.CarSlaughter** · 08-08-2005, 02:52 PM

Pics of the new fully rebuilt motor:

Head:

Short Block:
Money shot:

**invol.CarSlaughter** · 08-08-2005, 02:53 PM

All rods fully balanced. (and crank, of course)

Together (not bolted, just sitting there)

**invol.CarSlaughter** · 08-08-2005, 02:53 PM

I have larger pics of everything, if anyone wants to see em

***A20A1*** · 08-08-2005, 02:56 PM

Looking good.

**racerx** · 08-08-2005, 03:52 PM

nice huh?

**FyreDaug** · 08-08-2005, 04:18 PM

Bitchin, how much was the balancing and the boring? I'm doing the same rebuild with that motor and I want balancing

**SteveDX89** · 08-08-2005, 07:40 PM

Damn, you could eat off that shit! Nice job.

**JFreddy** · 08-08-2005, 10:26 PM

Yeah I'm workin on the same idea? costing? what was the bore? and did you paint your block urself?

**rjudgey** · 08-09-2005, 06:45 AM

what pistons did you use??

**truetune** · 08-09-2005, 07:23 AM

hawt

**racerx** · 08-09-2005, 11:11 AM

sorry guys, we should've given you specs: (i've worked closely with Dan on this one...)

Bore & pistons: 0.040" over (nice tight fit, huh? and we like it tight!

)
Block was completely stripped, sand blasted, and painted by the shop
Block was decked, just enough to get it level
Head was milled, same way, so there should be a minimal compression increase. (0.1-0.2?)

All rods and crank were balanced and resurfaced. feeler gauges used for bearings.

The parts for the short block came in a kit from TopLine, or ProLine... can't remember.

Ok, so the shop initially wanted a total of $1350 for just the short block disassembly, machine work, and assembly. However, after a little negotiation, we talked him down to a total of $700. Reason being, he took about 4 months to GET STARTED!!! He originally said it would only take 2 weeks, but he was in the middle of moving his shop from one end of town to the other, and he landed some deal with a racing company that dropped 21 engines in his old place, which he had to move to his new shop, etc etc.

The head was purchased online for $225/shipped. Fully rebuilt, tested for cracks and leaks, new springs, retainers, guides, seats, and valves. 3-angle valve job was done, but unfortunately, no P&P, and since it came assembled, we're not sure if that's something we want to bother with.

So, if you just want to bore your engine, most shops charge about $50/cylinder, and that's high. The balancing, though, is gonna get a little expensive. I'm not sure what that would add to it....

**racerx** · 08-09-2005, 11:14 AM

oh, and sadly, Dan wrecked his 3G. It's in the boneyard now.

so, he's trying to find another 3G for cheap, that has a good body. The motor, of course, is not an issue. So, if anyone knows of anything, let me know.

He might just end up selling the engine altogether, though. We'll see. I'm not sure if anyone here can actually afford this, plus shipping... at least soon, anyways.

**Accordtheory** · 08-09-2005, 12:01 PM

i just don't get why you guys are swinging off a stock a20's nuts so much..

.....sorry, that was rude

**Legend_master** · 08-09-2005, 01:37 PM

Originally Posted by Accordtheory

i just don't get why you guys are swinging off a stock a20's nuts so much..

.....sorry, that was rude

do you know what forum your on

.

as for the motor, it looks like the shop did a real nice job with everything. Man you guys pay alot for motor work, I got a b18a block bored, hot tanked, resurfaced, all internals shot peened and balanced then coated for $956.00 that included the price of new overbore pistons attached to the rods I already had. Good luck with your build

**bobafett** · 08-09-2005, 03:25 PM

u guys rock! keep us posted when its running

**racerx** · 08-09-2005, 09:25 PM

lol. thread title not PC enough for someone?

**halxi** · 08-09-2005, 09:46 PM

If hes going to sell that motor... no need to pay for shipping, he already has someone intersted in buying it.

ME! lol, i could just take my dads truck down there, load it up on the engine hoist, put it in the truck, tie it all down and im set. All id have to pay for is gas :P

**MattsAccord** · 08-09-2005, 11:42 PM

Sweet man I want one.

**Strugglebucket** · 08-10-2005, 12:30 AM

for $225 that head was a steal...

**racerx** · 08-10-2005, 12:12 PM

yeah, he's happy with it.

so, potential buyer, eh? you might just be able to get it out of him, since i don't know if he'll ever put it in another accord. he's got his mind set on this Subaru XT6, for like 1400. I don't know why he wants to get that when he can easily pick up a 3rd gen accord here for less than 1000.... and put all that stuff back on it.
But that's Dan.

...I don't know why he's not posting here more... prolly too busy doing "other things" on the net. lol

**88eyeguy** · 08-10-2005, 12:55 PM

drooling

***A20A1*** · 08-10-2005, 01:27 PM

Originally Posted by racerx

lol. thread title not PC enough for someone?

Just havin some fun.

**PikesPeak3G** · 08-10-2005, 02:05 PM

Originally Posted by halxi

If hes going to sell that motor... no need to pay for shipping, he already has someone intersted in buying it.

ME! lol, i could just take my dads truck down there, load it up on the engine hoist, put it in the truck, tie it all down and im set. All id have to pay for is gas :P

if you buy Dans ill Buy Yours

**halxi** · 08-10-2005, 02:35 PM

Originally Posted by PikesPeak3G

if you buy Dans ill Buy Yours

deal. But, i will NOT sell it to you if the compression is off, unless you REALLY want it. Dependent on how well its running at the time depends on how much ill sell it for.

**racerx** · 08-11-2005, 07:45 AM

well, dan just bought that subaru, so it's lookin like he'll sell the engine. i'll have him get off his lazy ass and post here...

Thread: Ahem* Ladies & Gentlemen, prepare to wet your shorts. 56k Beware

Thread Tools