$399ea AUD For B20A Motors

[gr3k0sLaV]

if you want to know the diff between two trannies, you should ask carotman.
he did the comparison when he was building his B20.

I'm sure it can be done, as I'm sure theres a certain $$$ atached

[gr3k0sLaV]

I'm sure it can be done, as I'm sure theres a certain $$$ atached

Anyone contacted them yet?

[ZackieDarko]

i called 'em up ..man! you guys got some crazy accents!...and you like to say "no worries" alot too :-p

i called them up and i can get the engine shiped here for 500 (AUD) and the cost of the engine and i can also get an auto tranny with it for an extra 150 AUD...im trying to look into finding a cheaper way to ship it but i havent had any luck yet! but i should have the money wired to them by mid next week! im so excited ya'll (=

[gfrg88]

500 aud for the motor and tranny shipped? how much usd is that?? sounds like a great deal...

[A20A1]

500 aud for the motor and tranny shipped? how much usd is that?? sounds like a great deal...

Read the posts above you, he said it was;
"$399 AUD which is about $290-$300 US, but i'd personally negotiate on the price. "

[Cheeseburger]

i called 'em up ..man! you guys got some crazy accents!...and you like to say "no worries" alot too :-p

lmao

[87RedAccord]

no worries ey mate, im thinking about getting one and chucking it in my accord mate. any way i gota go feed the kangeroo's.

[gr3k0sLaV]

i called 'em up ..man! you guys got some crazy accents!...and you like to say "no worries" alot too :-p

i called them up and i can get the engine shiped here for 500 (AUD) and the cost of the engine and i can also get an auto tranny with it for an extra 150 AUD...im trying to look into finding a cheaper way to ship it but i havent had any luck yet! but i should have the money wired to them by mid next week! im so excited ya'll (=

Guys you spoke to are in Bankstown which is the Lebanese hotspot of sydney. Lots of ethnics, lots of gangs, etc. Lots of WRX's, hotted up cars, etc. That's why they talk a bit different.

Good to see your getting a motor though.

[mykwikcoupe]

nope sounds like itas 500 aud for shiping alone and the 399 aud for the engine plus another 150 aud fopr the tranny so thats 1049 aud which is about 800 usd or so id guess

[gr3k0sLaV]

any updates?

[86-accord-lxi]

so , let me get this straight , engine and transmission BOTH
$800 usd including shipping???
if thats the case count me in.

[ZackieDarko]

300 (US) for the engine, 150 (US) auto tranny, 400 (US) shipping....the guy said that adding the tranny to the mix shouldnt change shipping... so 850 total-ish?

as for an update the guy said it could take 4-8 weeks for it to get here lame! but its worth it i guess it will give me time to get extra money to work on it! well ya thats it

[ZackieDarko]

whoops! thats 150 AUD not US ..so its like 112 (US)...my bad

[gfrg88]

so did you order it already?

[gr3k0sLaV]

good to see i've done some good.

Shipping time sucks, but that's the catch unless you want to pay higher costs to have it flown.

Oil's expensive.....

[ZackieDarko]

yes oil is uber expensive and this hurricane isnt helping one bit

no i havent ordered it yet on account of them not giving me all the info i need to get it all done ya know? but its ok they will get back to me and i'll have my B20 on its way (=


big ups to gr3k0sLaV for finding these so THANKS!

i'll keep anyone who cares at all updated

[b20a86lude]

damn thats real good i been lookin for a spare b20a how many do they have

[ZackieDarko]

the guy said "a few" so im guessen at least 3?

[86-accord-lxi]

is there anyway to reserve a b20a and tranny?

[ZackieDarko]

e-mail them and ask [email protected]

[Pro_Mod_Accord]

Are these auto tranys???or 5 spd?? or can yah get both?
Do they come with:?????
- ECU
- Wiring harness
- Starter
- altenator
- exhaust manifold
- engine mounts


From my understanding a wiring harness from a FI A20 will work with this engine, but you need to replace the ECU, read about it on hondaprelude.com......if my statement is incorrect please correct me...

[gr3k0sLaV]

Are these auto tranys???or 5 spd?? or can yah get both?
Do they come with:?????
- ECU
- Wiring harness
- Starter
- altenator
- exhaust manifold
- engine mounts


From my understanding a wiring harness from a FI A20 will work with this engine, but you need to replace the ECU, read about it on hondaprelude.com......if my statement is incorrect please correct me...

Auto's only available from this mob, however Manuals can be more easily sourced in the US.

For details contact Jap Performance directly.

Yes you can use the A20A ECU, performance is slightly compromised, but if your bothering to go all out and do an engine swap, you'd be wise to buzz off the factory ECU and just for an aftermarket system. With fuel & ignition control - gives you more tuning options and control, and down the track lets the addition of a turbo setup become a lot easier.

[Pro_Mod_Accord]

OK....Aftermarket ECU....definetly not my area....Anyone know what type of aftermarket ECU is compatible with our 3G's???And if so, where to get'em? Thanks, any reply would be appreciated...Definetly going to go to the next level if I can get a JDM B20A this winter when I store it away...

Done some research on the B20a, and a small few of Honda hardcores with Civics and Preludes have dialed in these blocks and pulling B18c Type R's that are also set-up..lots of potential...Any feed back would be great.

[ZackieDarko]

i heard sumthen about using the prelude ECU but dont quote me on that, use the search feature and you could probablly find out what you need

[gr3k0sLaV]

OK....Aftermarket ECU....definetly not my area....Anyone know what type of aftermarket ECU is compatible with our 3G's???And if so, where to get'em? Thanks, any reply would be appreciated...Definetly going to go to the next level if I can get a JDM B20A this winter when I store it away...

Done some research on the B20a, and a small few of Honda hardcores with Civics and Preludes have dialed in these blocks and pulling B18c Type R's that are also set-up..lots of potential...Any feed back would be great.

ANY aftermarket ECU should be compatible.

Basically fuck off all the stock accord ECU. Depending the ECU you go with some use factory sensors others replace them.

I personally wouldn't bother with the factory ECU unless you can have them easily modded, tuned, etc. In the case of ours well nothing can be done.

With finding out, most performance shops, places that do dyno supply them. I know here it's pretty easy to get.

We've got excellent well priced choices such as Microtech, Wolf3D, Haltech & MOTEC (probably regarded as one of the best around) Australian built and very highly regarded locally and internationally.

Kalmaker is another it uses GM Delco ECU's that have been adapted to connect to a laptop and software written, very popular choices as the GM DELCO ecu's are used in many Holdens (GM) here.