It took me two weeks but i found one a B18A ValveCover thats fits the B20A fits nice to here a pic JDMvalvecover on top and USDM on the bottom
It took me two weeks but i found one a B18A ValveCover thats fits the B20A fits nice to here a pic JDMvalvecover on top and USDM on the bottom
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
What's wrong with the B20A valvecover?Originally Posted by TWOLOUDNPROUD
ill take that b20a valve cover off ur hands how much u want for that valve cover
rhd restoration 2nd gen prelude
I heard that the spark plug seals might not fit properly. The B18A1 valve cover has the spark plug holes higher than the B20A so there is a gap between the head and the cover itself. (this is only rumors from preludepower.com) Just check everything to make sure they seal properly.Originally Posted by TWOLOUDNPROUD
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
This is why i am going with the B18A ValaeCover take a good look at the pic's The Timing Cover Busted up Bad and no luck to get a replacement here in the US and the B18 is the closest thing to replacementOriginally Posted by thegreatdane
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
That was the first thing i checked it seals up nice and tight just like the B20A cover.Originally Posted by carotman
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
i can get u a replacement cover dude!
My Baby; Honda Accord 86 S, B20A JDM
My Daily; Honda Accord 08 EX-L, K24Z3
My 86 custom build thread
Can you get the power steering brakets for the B20A?Originally Posted by L3G10N
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
if nothing go wrong, i'll have a complet Spare, so, yes.
My Baby; Honda Accord 86 S, B20A JDM
My Daily; Honda Accord 08 EX-L, K24Z3
My 86 custom build thread
how much do you want for them?Originally Posted by L3G10N
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
let me see how much i'll pay for the engine first. Will have some news in a few days
My Baby; Honda Accord 86 S, B20A JDM
My Daily; Honda Accord 08 EX-L, K24Z3
My 86 custom build thread
that will workOriginally Posted by L3G10N
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
no trouble! It's almost easy to get a B20A here. but they are all automatic... almost all. So, it's easy to get spare parts. The point is that I need to buy the complet engine.
My Baby; Honda Accord 86 S, B20A JDM
My Daily; Honda Accord 08 EX-L, K24Z3
My 86 custom build thread
Originally Posted by L3G10N
TWOLOUDNPROUD YOu dont have to have that cover on there, that would be more of a prefference thing. And L3G10N is there and abundance of B20a in canada? How does your junkyard system work up there?
we have a few yes. Almost all automatic. In fact, the only manual is for me and carotman :p But i can tell you that for now, in all the JDM shop, they have around 8 B20A accord.
What do you want to know about the junkyard system?
My Baby; Honda Accord 86 S, B20A JDM
My Daily; Honda Accord 08 EX-L, K24Z3
My 86 custom build thread
Timing belt covers are overrated. All you need is the bottom one to keep the water from splashing up from the road.
No projects. Life consumes my time and money.
Depends on how you look at it. You COULD have bad luck and end up getting something from the engine bay or even have a small rock jump up in the enginebay and get caught between the cam and timing belt, making the belt skip a couple of teeth. bye bye valvetrain..Originally Posted by SteveDX89
By then you'd probably feel pissed that you didnt get that timing cover replaced.
we dropped the motor in my friends integra with no top or bottom belt cover-and he had 6grand in the motor-YES if you hit something i guess it could happen-but its highly unlikely-if your going 2 leave the top off-its actually better just 2 go ahead and leave the bottom off too
If you have your bottom cover off too, I wouldnt consider it to be highly unlikely to happen at all. Unless you have PERFECT roads...
I've had my top cover off with the bottom cover on for the past year and a half and have had no problems. I'm sure it is possible but not very likely IMO.
No projects. Life consumes my time and money.
Originally Posted by L3G10N
Thats good to know for anybody looking for a b20. About the junkyards is it just like the USA where you go and pick the parts you want or is there soem other kind of system. The only reason I ask is cause is was almost impossible to find a junkyard when I visited Japan and I dident exactly know if there was anything special about canada.
L3G10N do you have a update on the power steering brakets for the B20A?
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Legend: For the junkyard, yeah, i can go and take what i want. For the B20A, i need to get the complet engine, not some parts. They are not into junkyard but into some JDM import shop.
TwoLoudnProud: Sorry, i had a big weekend to the final car show of the year in Montreal. I am responsible for the Quebec Accord Club, so it was an insane weekend. I'll try to go this week. If not, i can even sell you mine. Anyway, i'll get another one on the next B20A that i'll buy with Carotman.
My Baby; Honda Accord 86 S, B20A JDM
My Daily; Honda Accord 08 EX-L, K24Z3
My 86 custom build thread
Name your Price i can send the money by pay-palOriginally Posted by L3G10N
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
just runn without the cover...
JDM CONCEPTwww.jdmconcept.com
1989 Honda Integra LS 134whp/108lbs tq
1991 Honda Legend 163whp/163lbs tq
1991 Honda Integra LS-Special
Bookmarks