A USDM Hat for my B20A

[TWOLOUDNPROUD]

It took me two weeks but i found one a B18A ValveCover thats fits the B20A fits nice to here a pic JDMvalvecover on top and USDM on the bottom

[thegreatdane]

It took me two weeks but i found one a B18A ValveCover thats fits the B20A fits nice to here a pic JDMvalvecover on top and USDM on the bottom

What's wrong with the B20A valvecover?

[b20a86lude]

ill take that b20a valve cover off ur hands how much u want for that valve cover

[carotman]

It took me two weeks but i found one a B18A ValveCover thats fits the B20A fits nice to here a pic JDMvalvecover on top and USDM on the bottom

I heard that the spark plug seals might not fit properly. The B18A1 valve cover has the spark plug holes higher than the B20A so there is a gap between the head and the cover itself. (this is only rumors from preludepower.com) Just check everything to make sure they seal properly.

[TWOLOUDNPROUD]

What's wrong with the B20A valvecover?

This is why i am going with the B18A ValaeCover take a good look at the pic's The Timing Cover Busted up Bad and no luck to get a replacement here in the US and the B18 is the closest thing to replacement

[TWOLOUDNPROUD]

I heard that the spark plug seals might not fit properly. The B18A1 valve cover has the spark plug holes higher than the B20A so there is a gap between the head and the cover itself. (this is only rumors from preludepower.com) Just check everything to make sure they seal properly.

That was the first thing i checked it seals up nice and tight just like the B20A cover.

[L3G10N]

i can get u a replacement cover dude!

[TWOLOUDNPROUD]

i can get u a replacement cover dude!

Can you get the power steering brakets for the B20A?

[L3G10N]

if nothing go wrong, i'll have a complet Spare, so, yes.

[TWOLOUDNPROUD]

if nothing go wrong, i'll have a complet Spare, so, yes.

how much do you want for them?

[L3G10N]

let me see how much i'll pay for the engine first. Will have some news in a few days

[TWOLOUDNPROUD]

let me see how much i'll pay for the engine first. Will have some news in a few days

that will work

[L3G10N]

no trouble! It's almost easy to get a B20A here. but they are all automatic... almost all. So, it's easy to get spare parts. The point is that I need to buy the complet engine.

[Legend_master]

no trouble! It's almost easy to get a B20A here. but they are all automatic... almost all. So, it's easy to get spare parts. The point is that I need to buy the complet engine.

TWOLOUDNPROUD YOu dont have to have that cover on there, that would be more of a prefference thing. And L3G10N is there and abundance of B20a in canada? How does your junkyard system work up there?

[L3G10N]

we have a few yes. Almost all automatic. In fact, the only manual is for me and carotman :p But i can tell you that for now, in all the JDM shop, they have around 8 B20A accord.

What do you want to know about the junkyard system?

[SteveDX89]

Timing belt covers are overrated. All you need is the bottom one to keep the water from splashing up from the road.

[thegreatdane]

Timing belt covers are overrated.

Depends on how you look at it. You COULD have bad luck and end up getting something from the engine bay or even have a small rock jump up in the enginebay and get caught between the cam and timing belt, making the belt skip a couple of teeth. bye bye valvetrain..
By then you'd probably feel pissed that you didnt get that timing cover replaced.

[wprocomp]

we dropped the motor in my friends integra with no top or bottom belt cover-and he had 6grand in the motor-YES if you hit something i guess it could happen-but its highly unlikely-if your going 2 leave the top off-its actually better just 2 go ahead and leave the bottom off too

[thegreatdane]

If you have your bottom cover off too, I wouldnt consider it to be highly unlikely to happen at all. Unless you have PERFECT roads...

[SteveDX89]

I've had my top cover off with the bottom cover on for the past year and a half and have had no problems. I'm sure it is possible but not very likely IMO.

[Legend_master]

we have a few yes. Almost all automatic. In fact, the only manual is for me and carotman :p But i can tell you that for now, in all the JDM shop, they have around 8 B20A accord.

What do you want to know about the junkyard system?

Thats good to know for anybody looking for a b20. About the junkyards is it just like the USA where you go and pick the parts you want or is there soem other kind of system. The only reason I ask is cause is was almost impossible to find a junkyard when I visited Japan and I dident exactly know if there was anything special about canada.

[TWOLOUDNPROUD]

L3G10N do you have a update on the power steering brakets for the B20A?

[L3G10N]

Legend: For the junkyard, yeah, i can go and take what i want. For the B20A, i need to get the complet engine, not some parts. They are not into junkyard but into some JDM import shop.

TwoLoudnProud: Sorry, i had a big weekend to the final car show of the year in Montreal. I am responsible for the Quebec Accord Club, so it was an insane weekend. I'll try to go this week. If not, i can even sell you mine. Anyway, i'll get another one on the next B20A that i'll buy with Carotman.

[TWOLOUDNPROUD]

Legend: For the junkyard, yeah, i can go and take what i want. For the B20A, i need to get the complet engine, not some parts. They are not into junkyard but into some JDM import shop.

TwoLoudnProud: Sorry, i had a big weekend to the final car show of the year in Montreal. I am responsible for the Quebec Accord Club, so it was an insane weekend. I'll try to go this week. If not, i can even sell you mine. Anyway, i'll get another one on the next B20A that i'll buy with Carotman.

Name your Price i can send the money by pay-pal

[maxoutracer]

just runn without the cover...