replacing most suspension parts

[SQ is the SQUAD]

as i am in the process of redoing my accord, i am going to be replacing most of the suspension parts.

i already have new
front lower ball joints
iner and outer tie rods
sway bar link bushings
aem front rotor kit
all front bushings

i still need
rear bushings,
rear rotors (big brake?)
front upper ball joints/control arm (can buy together fromt ebay)
rear upper control arm w/ ball joint (ebay)
ss brake lines!


i am thinknig about replacing my sei sway bars with suspension tech's, but i am not sure if they are worth the money.

and good loonks on parts will be appriciated

[Justin86]

bigger sway bars F&R for sure and bigger brakes a must.

With the upper contol arms try to source prelude fronts and for the rears get longer bolts then just add spacers to adjust the camber.

What to you have for shocks/springs?

[SQ is the SQUAD]

unfurtunally for struts and springs i have some tokico blues and suspenstion tech springs that i cut from 4 years ago. i never installed them. i will use thise setup until i find/save for a set of real true 1pc coilovers

are these ebay prices for these arms good?
http://cgi.ebay.com/ebaymotors/HONDA...spagenameZWD1V

http://cgi.ebay.com/ebaymotors/UPPER...spagenameZWD1V

for the front arms i already have the ned bushings, i needed new upper ball joints so i figured to get new arms. ill look into the lude arms again but i am not sure on that mod. we know how much thosre rear arms fail so i want to replace them

[SQ is the SQUAD]

i am ordering the rear arms tonite, unless someone knows where ican get a beetter deal.

i will prob just go withthe front accord arms seeing that they come with new ball joints, i couldent fine new lude arms on ebay

[Justin86]

well that is pretty cheap and I bet the same with quality. The suspension is holding your life in check and I wouldn't go with cheap parts. Last I looked you can buy new lude a-arms with Moog ball joints for about 150 a set and new bushings. Just check with local parts stores. It will cost you more now but the next time you throw your car in a high speed corner you know for sure a ball joint won't snap from the load.
If you ever head what happened to oldschoolswap, his car was totaled from a cheap balljoint snapping on the freeway.

[cardoc33]

Well, if you havn't ordered yet, check my website. I sell only OEM quality parts. Front upper arms will cost $39.00 each plus shipping. Bushing kit for upper arm would be $25.00 per side.

[SQ is the SQUAD]

Well, if you havn't ordered yet, check my website. I sell only OEM quality parts. Front upper arms will cost $39.00 each plus shipping. Bushing kit for upper arm would be $25.00 per side.

too late