How to Wire Code Alarm 425 Security System HELP

[dalinxz]

Hey Im really lost on how to wire a code alarm 425 master module what are the wiring locations etc. I want to install it myself to learn how.

[TJ89Accord]

12V white, white/black + ign. harness, fusebox
STARTER black/white + ign. harness, fusebox
IGNITION black/yellow + ign. harness, fusebox
ACCESSORY yellow and blu/wht + ign. harness, fusebox
SECOND ACCESSORY none
TACHOMETER blue 2 pin plug from distr.
POWER LOCK green/white - DKP or mod. under pass seat
POWER UNLOCK green/red - DKP or mod. under pass seat
PARKING LIGHTS + red/black fuse box in dr. kick
PARKING LIGHTS - none
DOOR TRIGGER black/white - above fusebox *1
HEADLIGHTS red/white (low beam) + at light switch
WIPERS blue/yellow - at wiper switch
LF WINDOW UP/DN red/yel - red/blu A at drivers door motor
RF WINDOW UP/DN blu/yel - blu/grn A at drivers door switch
LR WINDOW UP/DN yellow - yel/grn A at drivers door switch
RR WINDOW UP/DN grn/yel - green A at drivers door switch
TRUNK/HATCH PIN green/black - under left side dash
HOOD PIN none
TRUNK/HATCH RELEASE none
FACTORY ALARM ARM none
FACTORY ALARM DISARM none
HORN TRIGGER blue/red *2 - at steering column
BRAKE WIRE green/white/slvr dot + at brake sw.


Notes: *1 In a two-wire harness wrapped in vinyl tubing above fusebox behind coinbox. Also found the same color in a green plug to the right of the steering column. *2 High-current ground. Use a relay when interfacing with this circuit.

Thats for an 89 Accord, since you didn't specify what car you actually have...

tim

[dalinxz]

I just bought my second 3gee first one was a disaster but i bought one yesterday its an 88 Honda Accord DX with power windows, locks the works, no sunroof though.

EDIT: btw its automatic