b16a pistons in b20a

[Kabuki]

Well... Yay and nuts. At least you can still use the stock F22/H23 rods as a direct replacement for boosting...

[AccordB20A]

here i am bringing back an old thread, but i need to know something, i have the pins bored out on my b16 pistons just now, guy at the machining shop just rang and told me that the rod was too fat or something to go in the piston and will have to either take some off the piston or the rod he said.

calling all those who have done this mod i need to know what you guys had done as it should be no different

Im using standard p30 b16a2 pistons and standard blacktop b20a rods that say pk2 on them

fast answer would be nice

[Hauntd ca3]

i'd prefer off the piston myself

[carotman]

I don't know if my rods were modified of if the piston was... I'll try to search through the pictures I have at home.

[AccordB20A]

thegreatdane informed me last night that he thinks with some b series pistons they need to have some taken off where the rod goes, im happy with that answer

[b20a86lude]

damn i wish i knew the answer so i want to get aftermarket pistons . and are u only allowed certain typre of psitons for the b16 i already hve the h23 rods

[Tommy AC89 Thailand]

This B20A for sale.

[rjudgey]

Just get Wiseco B20A5 pistons and H23 rods then your done!

[b20a86lude]

thank u so much

[Tommy AC89 Thailand]

B20B + Head B16A

[Tommy AC89 Thailand]

B20B + Head B16A

[AccordB20A]

fail thats not a b20a thats a b20b does not belong in this thread, as coo las it is

[MessyHonda]

nice car tho

[Tommy AC89 Thailand]

Yes you right!
That is B20B come from CRV
But, swap B16A cylinder head.

[Nafs Asdf]

You are wrong!
That is B20A come from CRV
But, swap B16A cylinder head.

if it's from a CRV it's a B20B or B20Z, not B20A.

[AccordB20A]

indeed crv has b20b like i said, i was correct kthx

[MessyHonda]

yeah the 3rd gen accord b20a wont bolt up with a b16 or b18 vtec head

[OldSchool86]

This B20A for sale.

You willing to sell the trany from that engine? its a (5speed)f2k5 correct?

[carotman]

No, it's Automatic

[thegreatdane]

actually the one on that picture is a 5 speed

[A18A]

are you sure? the cable coming off the gearbox looks like a tv cable. and there's no clutch arm thingy

[thegreatdane]

I was thinking that cable looked like the clutch cable sitting in its bracket but I might be wrong. the picture is too dark to see if there is any clutch release arm.

ok I just turned up the brightness on the picture and it does indeed look like there is no clutch arm.
I retract my previous statement lol

[AccordB20A]

haha yes auto for sure i can tell by the round bit that sticks out on the end of the box, aswell as the cablke that goes from the TB to the bocks

[OldSchool86]

yeah it is an auto. that is the kick down cable. i didn't see it before.

[OldSchool86]

Since we are on the subject of transmissions, can we get a sticky of what clutch kit and flywheel you need to use when you use a “B18A” bell housing to “A20A3” gearbox conversion on a B20A? I can’t seem to find where it was discussed.