Urgent need HELP B-series Install!!!!!!!

[Legend_master]

I believe the 90-93 and 94-01 passenger side teg axles are all the same. Don't quote me on that though.
The driver's side is obviously different, due to a different style of intermediate shaft.

I think all the 94-01 came with ABS and that makes them not work with our application. As for the axles not fitting check my other posts. Also SQ is the SQUAD my axles slid right into the hub with no problem at all so it's kinda odd that you had to force yours.

[Accordtheory]

What do mean by check your other posts? Does that means once you got the actual passenger side 90-93 axle, it was all good? I hope so..

I don't think an abs axle would cause problems, but who knows. You can get a 93 teg with abs. It's just a thing that fits over the hub to trigger a hall effect sensor, I don't think it would get in the way..

[Legend_master]

What do mean by check your other posts? Does that means once you got the actual passenger side 90-93 axle, it was all good? I hope so..

Yep that what it means.

Well I figured out two ways to fix the axle problem. Either use a a 90-93 passenger side integra axle (I had two drivers side axles ) and remove the dust ring on the back of the hub ord use an 86-89 integra passenger-side axle.

I don't think an abs axle would cause problems, but who knows. You can get a 93 teg with abs. It's just a thing that fits over the hub to trigger a hall effect sensor, I don't think it would get in the way..

Everything I have read led me to believe that it dose make a difference.

[SQ is the SQUAD]

maybe mine was a tight fit cuz the hub been sitting out side for a while, in i sand everythnig down and lub it up i prob wond have that problem. it did come out pretty good

[Legend_master]

can you guys tell me where the back up switch is located?

[Accordtheory]

On the tranny..it's the only connector on it.

p.s. Rywire can Juggle my fucking balls!

[ICEMAN707]

so what's the final verdict legend master? 90-93 integra LS axles and rear tranny mount bracket work? no need for placeracing axles? this means we could use stage 2 and stage 3 90-93 teg axles then...hell yea.

[Legend_master]

so what's the final verdict legend master? 90-93 integra LS axles and rear tranny mount bracket work? no need for placeracing axles? this means we could use stage 2 and stage 3 90-93 teg axles then...hell yea.

Well there is no problem with the drivers side 90-93 axles, but I will have to get back to on the 90-93 passenger side axle. The hub spins now that I removed the dust ring, but it looks like the axle is a little cramped. I will have to get back to once I get it running. If you were to use an 86-89 integra axle, it would fit much better and you dont have to remove the dust ring.

[Legend_master]

UPDATE: I am having a little bit of a wireing issue, but nothing that can't be fixed with a little bit of time and patience.

[SQ is the SQUAD]

dood, can i see a close up pic of your drivers side mount, actuall off of them if you can

[Legend_master]

dood, can i see a close up pic of your drivers side mount, actuall off of them if you can

Yeah I will take some when I get off of work today.

[Accordtheory]

no timing cover, huh? Me neither.. hey, what hoses are you using for coolant, integra hoses? I haven't even looked at that yet, or if the accord heater hoses will work either..

[Legend_master]

no timing cover, huh? Me neither.. hey, what hoses are you using for coolant, integra hoses? I haven't even looked at that yet, or if the accord heater hoses will work either..

theres no need for a timeing cover . I am running the factory upper radiator hose and I am running an integra lower radiator hose, but I had to make it smaller at then end to make it work with accord radiator. As for all the other hoses I used the accord ones.

[SQ is the SQUAD]

theres no need for a timeing cover

have you ever ran over a freshly paved road or some pebbles and you feel the bouncing around in your wheel well. well amigine some of those pebbles getting thrown between your timing belt and cam gear, it wont be nice. the timing cover is there for a reason. but, let me stop preaching cuz ill prob not have one on myself

[civic_90_08]

looks good y0...ive thought about doin this myself...my dad is a mechanice and he could get me just about any honda motor i want...hmmm

[Legend_master]

have you ever ran over a freshly paved road or some pebbles and you feel the bouncing around in your wheel well. well amigine some of those pebbles getting thrown between your timing belt and cam gear, it wont be nice. the timing cover is there for a reason. but, let me stop preaching cuz ill prob not have one on myself

my friend has been driveing around without a cover for almost 2 years and has had no problems, so no worries here.

[SQ is the SQUAD]

where are my closeup mount pics

[masterkillalw]

I am not running a timing cover either.

[Accordtheory]

Well, shit, I was going to put one on, but now I might not..yeah right, I'd be the one to get fucked by not doing it..

And close up mount pics would have Really helped me, I just spent way too long making a driver's side mount. I'll post pics later..

[SQ is the SQUAD]

Well, shit, I was going to put one on, but now I might not..yeah right, I'd be the one to get fucked by not doing it..
And close up mount pics would have Really helped me, I just spent way too long making a driver's side mount. I'll post pics later..

com on man, the suspense is killing me

[Accordtheory]

Ok..my fucking tranny is hitting the side of the bay and it can't really go over any farther, maybe like a 16th of an inch.. or my driver's side mount bracket (90-93 integra style, supposedly) will hit the mount on the car..wtf..

[88LXi68]

Ok..my fucking tranny is hitting the side of the bay and it can't really go over any farther, maybe like a 16th of an inch.. or my driver's side mount bracket (90-93 integra style, supposedly) will hit the mount on the car..wtf..

I pulled/hammered the passenger side of the bay out a bit to clear the tranny. I also am not running a timing cover, but I am putting mine back on because you can not set timing without it. The B-Series uses the a mark on the cover to set the timing, unlike the A-series window style on the tranny.

[Accordtheory]

[Accordtheory]

passenger side mount should be done in a couple hours...what do you guys think of the driver's side mount..? I call it the stegasaurus..isn't that the dinosaur that has that big ridge on its back? i don't know shit about dinosaurs..

[Legend_master]

passenger side mount should be done in a couple hours...what do you guys think of the driver's side mount..? I call it the stegasaurus..isn't that the dinosaur that has that big ridge on its back? i don't know shit about dinosaurs..

Holy shit, that looks really good. I had to angle the motor to get it to fit in the car. Once I cleared everything I placed the motor in there correctly. The rear mount and bracket had to be put on last and the firewall brake lines had to be moved up to allow for the mount to be placed. I didnt have to bend anything to get the tranny to clear, it all came down to moving the motor at the right angle.