Might give it a shot...

**sb_hbackDX** · 02-20-2006, 09:32 AM

I was looking at A20A1's "Weber Wars" and noticed the new 34 Weber...I was doing some research on it and like A20A1 said it could be a good try.
(

progressive) What do yall think? I was already looking for a new carb anyways...either the 34 or the 32/36 ? I didnt notice if it was mentioned but does the 34 have the same adaptor plate as the 32/36 and or 38/38?

***A20A1*** · 02-20-2006, 03:54 PM

Yes I emiled the supplier and they said the mounting base is the same.

I even posted that in the thread.

The adapter plate is around $50, you'll have to buy it separately from the carb.

The only carb that comes in a kit is the 32/36.

Make sure you get everything you need.

- Throttle cable bracket
- Filter
- Adapter plate
- 34 Weber Carb
- Throttle linkage.

Keep your stock carb to canabalize for parts.

**sb_hbackDX** · 02-20-2006, 08:13 PM

Kool thanks for the reply ! But what do you think about its application on your engines, like your opinion? Have any guestamate on what the CFM would be? I was thinking something around what the 32/36 gets. I know fuel economy would be ok...i dont think i would have to upgrade a fuel pump eh?

**sb_hbackDX** · 02-24-2006, 02:30 PM

I emailed the guys at Weber or whatever they call themselves just to get some specs on the 34 Weber and now im convinced that im going with the 34. 320+ CFM and flows better that the 32/36.... He also said that the adapters are different

...kinda confusing cuz A20A1 said the guys who supply the carb says that its the same as the 32/36. A20A1 who were the guys you emailed about the part ?