orderd parts today

[Elijah]

Well I orderd my diamond pistons,eagle rods with arp rod bolts and arp head studs. Look out for 400+whp on track days

[AccordRacing21]

Links to where you ordered this from? I want to do the same for my turbo set up.

[Elijah]

I called diamond for the pistons and got the rods and head studs local from my budys shop.

[Hash_man_Se_i]

oooh I can;t wait, I really need to see this beast.

[A20A1]

Diamond and ARP have their own sites... as for eagle

--- ARP
--- DIAMOND


Here is what I collected for the Turbo FAQ that no one reads.

- RODS
--- EAGLE @ IMPORTPARTS.COM
* According to eagle the lowest priced place to get them is importparts.com
* This eagle Rod is a direct fit into the A20A engine. the only change required is to enlarge to a 21mm wrist pin from a 19mm wrist pin. Diamond pistons will accommodate this change here's the eagle part number
* Part Number - CRS5394a3d - Eagle rods

This is old info though, so any new updates in recent years, let me know so I can change the link and info.

[gfrg88]

400+ whp on an a20?? that should be sweet

[Oldblueaccord]

I thought you got that stuff all thur Shawn last year? or is this a differant project.


Maybe you could get the pistons with a 19mm pin size so you dont have to resize the rods. Save some weight on the heavy end as well and maybe the cost would equal out.

wp

[Elijah]

I thought you got that stuff all thur Shawn last year? or is this a differant project.
Maybe you could get the pistons with a 19mm pin size so you dont have to resize the rods. Save some weight on the heavy end as well and maybe the cost would equal out.
wp

Sean was a joke all I did was lose money through him. I sent money for some stuff but well thats another story.

[newaccorddriver]

out of curiosity, are the pistons custom made, and if so, how much did it set you back?

[Elijah]

out of curiosity, are the pistons custom made, and if so, how much did it set you back?

Yes the pistons where custom they where around 580us with shipping ect..
I know I will get hit with duty on arrival.

[A20A1]

Didn't you get the turbo manifold from sean?

[Elijah]

Didn't you get the turbo manifold from sean?

My old one sold it got a nice one now. That thing was headache to nothing fit ohwell I moved on to bigger and better now.

[newaccorddriver]

Yes the pistons where custom they where around 580us with shipping ect..
I know I will get hit with duty on arrival.

whats so special about these pistons? higher/lower compression? just more durable and made for the HP?

i wish i could sink 5k into my motor rebuild... atleast i can dream

[bobafett]

btw its www.diamondracing.net thats where he ordered the pistsons.

they are custom forged pistons setup with a 21mm wrist pin to fit with the LS rods. also they can be made with any CR that you want, so if you are building NA they can make them high CR, or u can go 8.46:1 like i did for a forced induction project. also diamond can hook it up with some BADASS 'power adder safe' rings.

[Elijah]

btw its www.diamondracing.net thats where he ordered the pistsons.

they are custom forged pistons setup with a 21mm wrist pin to fit with the LS rods. also they can be made with any CR that you want, so if you are building NA they can make them high CR, or u can go 8.46:1 like i did for a forced induction project. also diamond can hook it up with some BADASS 'power adder safe' rings.

LOL Thanks Chris I used the same pistons as Chris I think we will both have some big power cars when done.

[newaccorddriver]

wait until i get a chance to turbo my car. i wont even bother with custom stuff. just the basic stuff, and OBD1 for tuning

hey elijah, out of curiosity, do you have a spare head i can trial/test fit my D series distributor on? id use my own car for it, but summers coming soon and i cant afford to have much downtime on it

[Elijah]

I will shortly I have a dead motor in my parts car I will be takeing the head off in acouple weeks mabey 3

[NXRacer]

wait until i get a chance to turbo my car. i wont even bother with custom stuff. just the basic stuff, and OBD1 for tuning
hey elijah, out of curiosity, do you have a spare head i can trial/test fit my D series distributor on? id use my own car for it, but summers coming soon and i cant afford to have much downtime on it

um, if you're going to go turbo, there isnt much that ISNT going to be custom . . . just FYI

[newaccorddriver]

um, if you're going to go turbo, there isnt much that ISNT going to be custom . . . just FYI

i meant the internals like the pistons and rods and such. i might consider a cam regrind when i go back home cause Colts just a 20 min or so drive away. asides from cam, theres not much i plan to do with the internals.

[AccordEpicenter]

i think im gonna buy some pistons next

[Elijah]

i think im gonna buy some pistons next

Mike over at diamond is a really cool guy I would talk to him if you are.

[Elijah]

i meant the internals like the pistons and rods and such. i might consider a cam regrind when i go back home cause Colts just a 20 min or so drive away. asides from cam, theres not much i plan to do with the internals.

Cam is the last thing you should worry about IMO Im not even gonna touch mine.

[bobafett]

Mike over at diamond is a really cool guy I would talk to him if you are.

yeah i worked with 'eric' and 'ron' i belive, they are both really helpful!
the guys at diamond pretty much rock!

[Elijah]

yeah i worked with 'eric' and 'ron' i belive, they are both really helpful!
the guys at diamond pretty much rock!

I was even talking to a girl for a sec to they have really good staff over there.

[Cheeseburger]

ur going to have a nice set up bro!1!