Page 3 of 4 FirstFirst 1234 LastLast
Results 51 to 75 of 84

Thread: 9 second a20!! a to b series tranny adapter plate!!

  1. #51
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: 9 second a20!! a to b series tranny adapter plate!!

    Quote Originally Posted by bobafett
    it is interesting that he is using an a20 in this car. i wonder if its because:

    a) the a20 is acually really good and worth using in race applications
    b) he already had the motor so why not
    c) just to be different

    it would be cool if (a) was the case and the a20 is just the best choice! we might start seing some aftermarket engine parts if civic drag guys start building a20s! :P it sure couldnt hurt anyway!

    A) seems like a good answer when you see his reply on H-T
    we held in the prelude in the begining of last season quebec's fastest honda for a while, I think we're the 2nd fastest sohc next to bisi.
    . I think being a 2.0L SOHC that is solid as a rock and can hold very high boost + the availability of the blocks dosent hurt either.
    Complete repair manual <---- (click here)




  2. #52

    'A20A3''s Avatar
    Join Date
    Mar 2003
    Vehicle
    '89 LXi Coupe
    Location
    eastern shore, MD
    Posts
    2,443

    Re: 9 second a20!! a to b series tranny adapter plate!!

    Quote Originally Posted by A20A3
    Isn't the A20 tranny pretty stout though?
    -Harvey

  3. #53

    NXRacer's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 LXi Hatch
    Location
    Tri-Cities, WA
    Posts
    6,557

    Re: 9 second a20!! a to b series tranny adapter plate!!

    aren't you going to be running a similar engine setup chris? If He's running 10:1 pistons at 30psi, I wonder how much you can run at 8.5:1???
    Nothin' 2 Old Racing

  4. #54
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377

    Re: 9 second a20!! a to b series tranny adapter plate!!

    its probably take him well over 40psi to make the same power. Hmm i think maybe b series gear ratios might be too short on my car...the stock lxi ratios are pretty good as is for boost... Jason budd probably runs it because the bottom end is bulletproof and cheap
    429whp 362wtq A20 TURBO. A20T>*

  5. #55
    3Geez Veteran smufguy's Avatar
    Join Date
    May 2002
    Vehicle
    10/Honda/Ridgeline
    Location
    NJ
    Posts
    7,202

    Re: 9 second a20!! a to b series tranny adapter plate!!

    using race gas and methanol, higher compression does not play a devastating role since the otane level of the burning fuel is a lot higher than our pump gas 93 (91 at some places).

    at a much lower compression, he can obviously run more boost, but it will develop traction issues when more power is created and it just gets wasted when its unable to be put down on the ground. lets say for example, you make 400hp at 10:1 cr and 30psi of boost, but with a 8.5:1 cr and 40psi of boost lets say he makes 600hp, but if he is loosing traction at 400whp and then when 500hp is reached its hard for him to hook up, then the extra 100 or 150hp is going to waste cause everytime u hit the gas, you just loose grip.

    when these guys tune their motors, they tune it to a point that they got a little bit left over (hp i mean) and run standard Ets with minor adjustments.

  6. #56

    bobafett's Avatar
    Join Date
    May 2002
    Vehicle
    Stock 86 Accord LXi Hatch
    Location
    Longview, WA
    Posts
    6,545

    Re: 9 second a20!! a to b series tranny adapter plate!!

    yeah my motor 'might' be capable of 30psi, where i would hope to make around 400 whp, but i wont ever try it with THIS block, because its bored .050

    my next motor is going to be stock sized pistons (or something smaller anyway) and ill basically emulate teh rest of my setup exactly, cause i think its going to be pretty solid.

    ps, motor SHOULD be running either this weekend or next weekend hopefully!

  7. #57
    3Geez Veteran gfrg88's Avatar
    Join Date
    Jan 2005
    Vehicle
    1986 Honda Prelude 2.0Si-T
    Location
    A Mile High.
    Posts
    4,788

    Re: 9 second a20!! a to b series tranny adapter plate!!

    ohohohoh, you better get some video clips when you start it up!!!
    -Gio
    .
    .
    My E85 Turbo Build
    .
    .
    5280FEST
    .
    .

  8. #58
    LXi User sinisterfuzzy's Avatar
    Join Date
    Mar 2006
    Vehicle
    1989 Accord LX (rip), 1993 Civic Si (rip), 2000 Contour (burn in hell), 1992 Integra LS, 1992 Civic CX (Project)
    Location
    Holland, MI
    Posts
    542

    Re: 9 second a20!! a to b series tranny adapter plate!!

    anyway we could get specs on that thing? might wanna get one fabbed up?

  9. #59

    A20A1's Avatar
    Join Date
    Sep 2001
    Vehicle
    2006 Chevy Cobalt LS
    Location
    Kaneohe, Hawaii, United States
    Posts
    88,734

    Re: 9 second a20!! a to b series tranny adapter plate!!

    Ask him. Or follow his method and make your own... or get a shot to make one.

    Hey look at his runners you can see he's running ITB's by the throttle shaft.
    - llia


  10. #60
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377

    Re: 9 second a20!! a to b series tranny adapter plate!!

    im already worried about breaking trannies, although this is the only thing im semi-worried about. Im going for big boost also so we will see, these should be tits
    429whp 362wtq A20 TURBO. A20T>*

  11. #61
    SEi User gp02a0083's Avatar
    Join Date
    Nov 2004
    Vehicle
    1989 Lx-i Hatchback
    Location
    Jackson, NJ
    Posts
    1,837

    Re: 9 second a20!! a to b series tranny adapter plate!!

    i like how each bolt head is smileing

    1989 Accord Lx-i hatchback (current DD project)
    1986 Olds Cutlass 442 clone (never ending project)
    3Geez resident body man
    Owner of Wreck-less auto body

  12. #62

    A20A1's Avatar
    Join Date
    Sep 2001
    Vehicle
    2006 Chevy Cobalt LS
    Location
    Kaneohe, Hawaii, United States
    Posts
    88,734

    Re: 9 second a20!! a to b series tranny adapter plate!!

    Quote Originally Posted by carotman
    yeah, stock dizzy and standalone + msd stuff.

    Looks like there is something missing from the distributor though. Look at the outside of the distributor, it's missing that part with the pins in it.
    - llia


  13. #63
    LXi User L3G10N's Avatar
    Join Date
    Aug 2002
    Vehicle
    1986 accord hatchback S B20A JDM / 1998 Accord LX Coupe
    Location
    Princeville, Quebec
    Posts
    964

    Re: 9 second a20!! a to b series tranny adapter plate!!

    if you talk about the vacuum pin, they are useless when you use a MSD Digi6.

    My Baby; Honda Accord 86 S, B20A JDM
    My Daily; Honda Accord 08 EX-L, K24Z3
    My 86 custom build thread

  14. #64
    SEi User
    Join Date
    Jun 2005
    Vehicle
    1986 Honda Accord POS tranny
    Location
    Edmonton AB
    Posts
    1,608

    Re: 9 second a20!! a to b series tranny adapter plate!!

    Quote Originally Posted by bobafett
    yeah my motor 'might' be capable of 30psi, where i would hope to make around 400 whp, but i wont ever try it with THIS block, because its bored .050

    i know the max is 0.030 overbore, but does that extra 0.020 actually make that huge of an impact? id like to know why cause im already getting my block 0.02 overbore and it doesnt seem like anything really, just a thin metal scraping

  15. #65

    A20A1's Avatar
    Join Date
    Sep 2001
    Vehicle
    2006 Chevy Cobalt LS
    Location
    Kaneohe, Hawaii, United States
    Posts
    88,734

    Re: 9 second a20!! a to b series tranny adapter plate!!

    Quote Originally Posted by L3G10N
    if you talk about the vacuum pin, they are useless when you use a MSD Digi6.

    I'm not refering to the advance diaphragm.



    so, It's called a vacuum pin?
    ... the part outside TEC distributors.

    ?
    - llia


  16. #66
    LXi User coope's Avatar
    Join Date
    Sep 2006
    Vehicle
    89 accord lxi efi
    Location
    mississippi
    Posts
    517

    Re: 9 second a20!! a to b series tranny adapter plate!!

    He got rid of that fuckin black box

  17. #67
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: 9 second a20!! a to b series tranny adapter plate!!

    Hey guys, check out this thread. He posted his times after the tranny swap.

    B-tranny results

    10.06@151.37
    Complete repair manual <---- (click here)


  18. #68
    3Geez Veteran smufguy's Avatar
    Join Date
    May 2002
    Vehicle
    10/Honda/Ridgeline
    Location
    NJ
    Posts
    7,202

    Re: 9 second a20!! a to b series tranny adapter plate!!

    hmmm that gotta be the fastest A20 so far then. he is not too far from a high 9s

  19. #69
    DX User
    Join Date
    Nov 2006
    Posts
    16

    Re: 9 second a20!! a to b series tranny adapter plate!!

    All I want to know is, How can I get my hands on that adapter & what else is needed to make it work.

  20. #70
    SEi User ZackieDarko's Avatar
    Join Date
    Aug 2005
    Posts
    1,910

    Re: 9 second a20!! a to b series tranny adapter plate!!

    SQ is the SQUAD is going to start work on one soon


    you could always join jerkoff land....i mean Honda-Tech and PM him (that jason guy) and ask him aboot it

  21. #71
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: 9 second a20!! a to b series tranny adapter plate!!

    anyone know what that adapter plate is mad out of(type of metal and size). i might try this
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  22. #72
    LX User ilikevtecs's Avatar
    Join Date
    Jul 2006
    Vehicle
    88 LX
    Location
    Waupaca, WI
    Posts
    129

    Re: 9 second a20!! a to b series tranny adapter plate!!

    TITS, looks amazing!

  23. #73
    LX User ilikevtecs's Avatar
    Join Date
    Jul 2006
    Vehicle
    88 LX
    Location
    Waupaca, WI
    Posts
    129

    Re: 9 second a20!! a to b series tranny adapter plate!!

    Quote Originally Posted by SQ is the SQUAD
    anyone know what that adapter plate is mad out of(type of metal and size). i might try this
    looks like aluminum but thats just a guess

  24. #74
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: 9 second a20!! a to b series tranny adapter plate!!

    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  25. #75
    LX User hondaman1986's Avatar
    Join Date
    Jul 2006
    Vehicle
    86 hatch, and 93 maxima SE w /VE30DE
    Location
    clackamas
    Posts
    171

    Thumbs up Re: 9 second a20!! a to b series tranny adapter plate!!

    Quote Originally Posted by adams86lxi
    Well i doubt anyone has found this yet. My friend sent it to me today while i was at school and i was in complete aw over it!!! Its Jason budds a20!!! Sick ass setup! Here are some pics of it! I guss the only problem he ever had with it was the trannys kept breaking so he made a adapter so he could put B series trannys on it!! I was like HOLY SHIT!! So here is the pics and the link for all the info!!
    here is the link
    http://www.honda-tech.com/zerothread?id=1540419
    i guess thats the car its going in now.








    hey did anyone notice that hes running a ITB setup?

    I did

Similar Threads

  1. PROJECT: A20A to B18A Tranny Adapter Plate
    By SQ is the SQUAD in forum Restoration & Custom Fabrication
    Replies: 145
    Last Post: 06-17-2022, 08:01 AM
  2. Adapter Plate from B20a to USDM Trany
    By TWOLOUDNPROUD in forum JDM B18A / B20A Swap Tech
    Replies: 17
    Last Post: 09-19-2008, 03:15 PM
  3. Possible B series tranny adapter??
    By Chuoiz in forum Performance
    Replies: 20
    Last Post: 09-02-2006, 07:22 AM
  4. adapter plate , tubo manifold
    By newaccorddriver in forum Forced Induction
    Replies: 4
    Last Post: 02-23-2006, 07:23 PM
  5. adapter plate and charge pipes for turbocharger ?
    By Neuspeed87lx in forum Performance
    Replies: 1
    Last Post: 01-27-2003, 08:14 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
VigLink badge