How much play should be on the connecting rod while attached to the crank. I have a slight bit on each rod. I'm talking about side to side not up and down on the bearings.
How much play should be on the connecting rod while attached to the crank. I have a slight bit on each rod. I'm talking about side to side not up and down on the bearings.
Connecting rod end play
Standard.............................. 0.006 to 0.012 in. (0.15 to 0.30 mm)
Service limit........................... 0.016 in. (0.40 mm)
.
They are all at .012 in. So I'm fine Thanks Man! I could hear a little clicking when I was turning the crank, it's got to be that, because all the bearings are fine.
Don't you have a shop manual or at least a Hayne's? It's all in there.
No projects. Life consumes my time and money.
It's in the wifes car and she is at work...Went out of town and did some reading and I left it in her car the other day.
Originally Posted by BITESIZE
It's in the wifes car and she is at work...
No projects. Life consumes my time and money.
Posting Permissions
Reply With Quote
Bookmarks