I need some info on body kits. I dont want to put a body kit that comes for my Accord because it looks to normal for my taste. I want to adapt a Black widow kit from a 4 gen Accord, but im not sure if it will go on right. Could anybody help me with my problem.
Plans have changed....The car is gone & im on to a new project....Nissan Maxima & 240sx/S13 Silvia....But the modders of the 3rd Gens still have my props. Not to many other cars take tha drive to do like a 3rd Gen
The black widow kit is made of thin fiberglass and should be easy to modify. First you will need to either remove your bumper or buy a new one. Coat the top of the 3G bumper with fiberglass release agent then apply ablut 3 layers of resins and fiber mat to the top of the bumper. After curing remove the fiberglass mold (if the release agent was properly applied it will pop off easily) apply teh fiberglass release agent to the inside of the mold and lay 3 to 5 layers in it. After curing remove the skin that you have just made and glass it to the bottom part of the black widow kit.
"AAHHH Teamsters, If only I could be as lazy and surley as a Teamster." Quote by Homer Simpson
From what car should I order the kit as? 90-93 Honda Accord, 90-93 Acura Integra, or an older prelude
Last edited by 89AccordGSR; 05-07-2002 at 08:33 AM.
Plans have changed....The car is gone & im on to a new project....Nissan Maxima & 240sx/S13 Silvia....But the modders of the 3rd Gens still have my props. Not to many other cars take tha drive to do like a 3rd Gen
accord would be your best bet
Posting Permissions
Reply With Quote
Bookmarks