Video of my car running... sort of....

[bobafett]

I am uploading the video right now.

I dont have any fancy video editing software, so its a huge file, and not very long either. Deal with it.

Basically I got the car to idle today, but it appears to be leaking small amounts of coolant out the corner of the headgasket.

Its running SUUUUPER fricken rich, as you can see by the clouds of fuel that come out of the muffler when I start to wrap the engine up at all.
The video doesn't really capture the sound very accurately at all. If you turn ur speakers up a bit it is better, but honestly the car sounds straight up mean in person, and the muffler tone is a lot less "mufflerish".... it sounds pretty ricey in the video IMO.

But this shows that it at least runs... I took it around the block and it stubled really bad on any load, so Im sure the timing is still WAY off. Also when I pulled it back into the garage the car wouldn't idle again (just like before).
Enjoy the lame ass video...

http://www.a20turbo.com/features/chr.../gayaccord.MOV

EDIT: its 65mb so its going to take a while to upload. As soon as its finished uploading, it will be there though...

[88LXi68]

ahh the intial startup of a new engine...It is a time of joy and a time of anger. You get happy cause it runs, but then you notice a small oil leak, it doesnt idle, or it leaks coolant.

All I can say is congrats for getting it going and have fun fine tuning and solving the little problems.

But again congrats and break it in properly!

[A20A1]

I can probably take a stab at reducing the size of the video. I still need to download it though.

[gfrg88]

ill wait for mike to resize it

[MessyHonda]

yeah i used pinnacle for making the video smaller...its a free program but i only used it then uninstalled it. i had like 1gb worth of video and it converted to 82mb mpeg...so your video might be like 9mb if you reconvert it. your car is sick... i just love the way it reved up...must of cost a prety penny tho. i like your stearing wheel...what car is it from and will it connect to cruise control and horn ?

[stat1K]

i think i saw the spark plug wire move when you reved it... should that happen? and messy that wheel looks to be from a lude... i like the hatch man its lookin real nice keep up the good work!

[Nospeed]

damn dialup. im sure its looking good chris...you need to update your webpage so all the functions work. someday...someday ill be doing the same. congrats bro.

[bobafett]

yeah mike i tried using RAD converter but it only picked up 16 frames.

if you happen to have software that will shrink it down, just lmk and I can give u ftp access to my site to upload it. (or maybe u can send it to me thru gmail if that is easier...but i dunno their file size limits)

yeah i saw the plug wire move too... i will double check that plug to make sure its in there right, they all seemed to be nice and snug when i checked them before startup, probably the wire is just a bit loose.

[ZackieDarko]

long live laruel blue hatch backs and long live washington

[EricW]

Sounds good, can't wait to here it after its tunned and running right.

Where did you get that A pillar guage pod from, or what car is it out of?

[Legend_master]

Looking really nice dude, and I D/L at 736K steady . Out of the whole time I have been in this forum I had no idea you drove a Hatch . Good luck with everything

[Cheeseburger]

dam brother shes looking really good!!!!!!!! get some vids when shes in action

[bobafett]

heck yes! hatches and washington baby!

i like 2dr the next best, then the 4dr. except jons car, his 4dr is probably my all time favorite at this time.

it sounds REALLY good in person, but as you can tell it runs pretty rough for the time being. I am going to replace the headgasket again with something a little different and then I imagine I will have to shell out $500 on a good adjustable timing light and a wideband.

the a pillar pod is an autometer from 88-91 EF honda civc/crx... fitment is not that great, but hey if you need instrumentation, its more important to have it than not have it cause ur pillar pod doesnt mount well.

my whoopdidoo AF gauge tells me im sitting at full rich the whole time. I am hoping by advancing the timing more it will lean out, but at the moment it throws CEL and stumbles under load, so i guess i need to check out the code (probably EGR) and take it one step at a time.

[Cheeseburger]

she sounds so sexy!!!!!!!!!!!!!! i forgot to say that

[guaynabo89]

Is that an egt sensor you have there?

What kind is it and hows it working for you?

[bobafett]

autometer egt. i think i hooked it up wrong, cause its not moving for me at all. all my other gauges are working, but this one stays on 400 degrees no matter what.

i havent had a chance to play with the wireing and check what i might have messed up though

[A20A1]

she sounds so sexy!!!!!!!!!!!!!! i forgot to say that

Not the way I hear it.
It sounds like its hurting.
Still working on the video... Check the valve timing along with the engine timining.

[bobafett]

valve lash has been painstakingly set to the stock specs since Im running a stock cam atm.
(.005 - .007) .006 intake cold.
(.010 - .012) .011 exhaust cold.

engine timing is an unknown. my cheapo timing light is hard to work with. the closest we 'found' on the flywheel was the 24b mark. but that was with my brilliant friend trying to time it.

its true that it wants 15btdc with the vacuum stuff plugged so there is no advance, right?

[bobafett]

Do you have a point of reference for what 15 degrees looks like as far as the tilt of the dizzy?

I am wondering if the dizzy is pointed backwards towards the firewall, or if its tipped forwards, or pretty close to centered.

Basically trying to get it close, cause I am having a heck of a time even seeing timing marks on the flywheel.

[guaynabo89]

does your flywheel have a tdc mark? If so the only accurate way is to get a timing light that is adjustable for degrees.

Thats what I had to to since my alum. flywheel only has a tdc mark and thats all.

[bobafett]

it has a couple marks, but I am having a really hard time telling which are which... i am probably going to buy the nice timing light anyway, just to accellerate the process and make it easier on myself.

[EricW]

I have the same problem with the timing, I guess I need to find a good timing light also. Although I Probably wont need it after I go OBD 1.

[RamThis]

Sounds mean for a rice burner lol. My rice burner has that nice small hole in the muffler sound. Its my 96 Ram that has the mean sound.... http://media.putfile.com/Ram-Open-Headers
BTW, what all have you done to that thing? It almost sounds like it has a cam lope??? You will definitely have a heck of a sleeper when you are done though. I had thought about dropping the body of my cord onto a modified frame with a chevy 350 shoehorned in it somehow and putting quiet mufflers on it, and leaving the body just as it is, no new paint, nothing wild on it, just a basic looking accord, but oddly you might see a diff pumpkin peeking out from under the rear, and wonder why the rear tires squal when I shift gears LOL. Not a plan yet, just one of those ideas that may never come to fruition lol.

[gfrg88]

Sounds mean for a rice burner lol. My rice burner has that nice small hole in the muffler sound. Its my 96 Ram that has the mean sound.... http://media.putfile.com/Ram-Open-Headers
BTW, what all have you done to that thing? It almost sounds like it has a cam lope??? You will definitely have a heck of a sleeper when you are done though. I had thought about dropping the body of my cord onto a modified frame with a chevy 350 shoehorned in it somehow and putting quiet mufflers on it, and leaving the body just as it is, no new paint, nothing wild on it, just a basic looking accord, but oddly you might see a diff pumpkin peeking out from under the rear, and wonder why the rear tires squal when I shift gears LOL. Not a plan yet, just one of those ideas that may never come to fruition lol.

he's done everything. its a fully built engine

[A20A1]

From 64 MB It's now 38 MB with slightly smaller window size. Quality has suffered minor loses.

I didn't shrink the video I just cropped it in some areas to reduce the size.

I want to try the H.264 quicktime encoding I've already tried the DV NTSC and MPEG-4 quick time encoding. They also have a seperate MPEG-4 that is .wmv as well as others like avi and flash etc.