Wire Tucking is the Sex

[Legend_master]

I decided to start cleaning up my engine bay and I also wanted to try wire tucking. I did a few other things to clean up as well (Short ram intake, Integra clutch cable(shorter then the Accord one), modified the catch can, ETC...). This would definitely work with the stock engine and would look quite clean if you ask me.

Whats Required
1. Tools to remove the fender
2. Soldering Gun (you could use electrical tape, but that would be dumb)
3. The connections for the end of the wire you plan to extend (explained Further in the thread)
4. Enough wire to extend them where you want

I started by cutting both ends of a the wire I wanted to extend at the junk yard.

I wired them backwards to each other with enough wire between them to extend them to the necessary length (most people just cut the harness in the car and extend it, but I did not want to do it that way)

I ran the wires through the fender. The wires for all the lighting were mounted in the bumper housing.






Here is a before and after shot

Before

After


I will be doing the passenger side next week. Enjoy

[reanimator420]

wow now do mine that looks great!!

[russiankid]

looks like some thing is missing, but looks very nice, you can now add mods in those areas or w/e you like

[Legend_master]

looks like some thing is missing, but looks very nice, you can now add mods in those areas or w/e you like

Intercooler piping

wow now do mine that looks great!!

Thanks $900.00 and hour and I will hook you up, LOL

[maxoutracer]

i love that clean look!

[reanimator420]

nah now your crazy but looks nice though

looks like you did the whole thing in my op.

[Legend_master]

i love that clean look!

Yea me to, some of those people on H-T do some serious wire tucking. They shave all the holes that they don't use anymore and hide everything.

nah now your crazy but looks nice though

In all reality the job is not that hard all you need is wire, soldering iron, electrical tape, wire loom, and some time. If anybody wants to embark I will help them as much as I can.

[reanimator420]

you should make a how to for shits and giggles then tell them i told you to lol

[gfrg88]

i HATE wiring!!!!!! thats why im scared to converting to obd 1

[MessyHonda]

yeah you got to shave all thoes holes... but it looks way better...i wish i could do that...im not a wiring dude...i have a soldering iron that i cant use...i tryed to fix my speaker and 5 mins after the solder broke...making it sound bad again...

[Legend_master]

i HATE wiring!!!!!! thats why im scared to converting to obd 1

yeah, wireing makes the engine bay looks clutered. You must join the dark side and covert to OBD-1 .

[Legend_master]

yeah you got to shave all thoes holes... but it looks way better...i wish i could do that...im not a wiring dude...i have a soldering iron that i cant use...i tryed to fix my speaker and 5 mins after the solder broke...making it sound bad again...

dude practice makes perfect, just keep trying and you can figure it out.

[king86]

wow very sexy
i think im gona have to try that. if i can get off my bumper...

dunno how im supposed to work round it

[reanimator420]

uhh more pics of your car^

[Cheeseburger]

looking good bro1

[3gn86lxi]

Hello Mr. Master.........might I say that is the cleanest engine bay I think I may have ever peeped in a long time.
Props to you sir for you hard work and dedication to your beloved. May you continue to with your quest, and...........shit, I forgot. Hold on I need another beer.
No really, that looks AWSOME man.

[speedpenguin]

That looks beautiful! First wire tuck I've ever seen in a 3G. We'll probably be seeing more now.

[Legend_master]

Hello Mr. Master.........might I say that is the cleanest engine bay I think I may have ever peeped in a long time.
Props to you sir for you hard work and dedication to your beloved. May you continue to with your quest, and...........shit, I forgot. Hold on I need another beer.
No really, that looks AWSOME man.

LOL, all I have to say is

That looks beautiful! First wire tuck I've ever seen in a 3G. We'll probably be seeing more now.

Thanks, i hope to see more of this doen with the stock engine. The bau of the 3gee is so clutted, but the a20 is a good looking motor.

looking good bro1

Thanks dude

[thegreatdane]

Nice work! Fiddling with wires is fun So are you going to hide away the fuse box too?

[Legend_master]

Nice work! Fiddling with wires is fun So are you going to hide away the fuse box too?

I am contiplating it, but I am not to sure that is what I want to do. I dont have any AC parts in my car, so there would be plenty of room to hide it under my passenger side dash.

[AccordEpicenter]

wow that is seriously clean man, i really like it!! I have soo much wiring underhood for alky injection and everything else my effin fenders would be bulging if i did this hahaha. Solid work.

[Legend_master]

wow that is seriously clean man, i really like it!! I have soo much wiring underhood for alky injection and everything else my effin fenders would be bulging if i did this hahaha. Solid work.

Thanks, it probaly looks like the inside of a computer under your hood, LOL. With enough electrical tape and your could get it to fit in the fenders, no problem. Let me know if you need any help with it.

[Hash_man_Se_i]

I think that looks good, and is a damn good wire tuck... but don't move the fuse box... IMO, thats just dumb and a waste of time. I personally would want mine easily accesable, besides which I dont think we have much room behind our dash's for a fuse box to fit.,

[Legend_master]

I think that looks good, and is a damn good wire tuck... but don't move the fuse box... IMO, thats just dumb and a waste of time. I personally would want mine easily accesable, besides which I dont think we have much room behind our dash's for a fuse box to fit.,

You do if there is no AC blower there .

[Fushi]

Great work.
It looks so clean !
I'm being jealous !
I've always loved this clean look when the wires are hidden. It seems there is a lot more space in the engine bay .