Hey all, the pressure plate finally gave up the ghost in the '88 LX, so I picked up a new clutch kit and dropped it in. Now, the thing is, I have to adjust the clutch so that there is practically ZERO play - otherwise, teh clutch won't fully disengage.
The Haynes manual I have, is calling for 1/4" of play. I've got more like 1/16". Is that going to be ok, to have running around?
The Haynes manual is WRONG - the Shop Manual is calling for 2.5mm-4.5mm (.09-.17) So I'm going to 1/10"
my friend had the same problem but after about 30-40 starts his finally sat right and was able to be adjusted and stayed that way.
Yep, got her running... omg wow, now the Weber is running like total shit.Deiseling when I shut it off and all. grr... went down, dumped $25 of 93 octane into her, and that seems to have helped, but she's really jumping and sputtering erratically. Maybe the gas went bad - I'm going to burn through it, and see if it gets better... either way, it's time I got the jets running right, and the exhaust fixed on her.
Did you possibly knock off the control wire to the idle control solenoid?
Visit us at www.valleyspecialists.com for all of your Honda and Acura Parts and Service needs!
Posting Permissions
Reply With Quote
Bookmarks