ok so im driving down the road and a shift into 3rd and i start to hear a load clicking noise now when i put the clutch in it goes away but when i let it out it comes back. dose this have something to do with the tranny or the clutch?
ok so im driving down the road and a shift into 3rd and i start to hear a load clicking noise now when i put the clutch in it goes away but when i let it out it comes back. dose this have something to do with the tranny or the clutch?
Most likely the bearings in the transmission. Likely the input shaft bearings. Sorry, dude... You need to remove the transmission and overhaul it.
Visit us at www.valleyspecialists.com for all of your Honda and Acura Parts and Service needs!
is this a hard task and what will i need to do the overhaul
how about any oil in that bastard?
wp
are u asking if ive done a change or if its been leaking and there nothing in there cause i know it doesent leak. but the clicking seems to have gottin into the 1st and 2nd gears now. also i just but on my brembo oem replacments and some aem pads could i have not tightend a bolt or something of that messureOriginally Posted by Oldblueaccord
check your suspension and brakes.
most likely your clutch through out bering is gone.
Alex.
is that an easy fix? i do know that when they installed the clutch the guy said something about it had a little click because it wasent shimed quite right. could it be a shim ?
also someone had told me it might be my cv joint, i dont know if hes right or not but he said they tend to click when they start to go out
Posting Permissions
Reply With Quote
Bookmarks