My conversion from carb to fuel injected...PICS

[twofast4u]

Hey guys

i jus wanted to share my experience while i am doing this. Here are some pics of what i have done so far:

This is my current motor:





Here is the motor out of my car:






And here is the motor thats going into my car(its still in the parts car which i bought for $100):




I ripped apart half the interior so far, i will take pics of it soon. Sorry if some of thw quality might be bad on some of the pics it was taken with my phone.
Will update soon

Enjoy!

[gfrg88]

you should take your time and clean out the engine bay really good while the engine is out. keep up the good work and keep us posted

[Vector]

awsome work, hows it run? tonight i'm actually gonna test my efi kit i mashed together to see if it runs.

[twofast4u]

you should take your time and clean out the engine bay really good while the engine is out. keep up the good work and keep us posted

Yea, yesterday i took out the pressure washer and soap and cleaned it up good, also im painting the engine bay black since my car is black. The whole reason i started this project was because my car got broken into so i needed a parts car. and with my luck the parts car only had 170 000 km on the motor and it was fuel injected. The one i just took out had 365000 km on it which is the original motor. I will keep u guys updated! Thanks

[carotman]

Good luck on your project.

Honestly, this is the best mode one can do to the car

[crazykamper]

nice job, never had a carb, but i hear that it is one of the best things u can do! good job.

[snoopyloopy]

nice. looks real good. too bad you don't have a b20a to stick in there, though. that would be really badass.

[twofast4u]

nice. looks real good. too bad you don't have a b20a to stick in there, though. that would be really badass.

I know i wish i could! but how much $$$ and configeration would it take to put it in?

[TheWatcher]

you should take your time and clean out the engine bay really good while the engine is out. keep up the good work and keep us posted

Better yet, if it were me, I'd repaint the entire engine bay, like Military Mase.

Peace.

[88accordhb]

sweetness.

[twofast4u]

Better yet, if it were me, I'd repaint the entire engine bay, like Military Mase.
Peace.

The engine bay is half painted so far i will take pics upon completion!

[speedpenguin]

I wish I had a hoist...

Good job, dude!

[twofast4u]

Alright guys i worked all day yesterday and today and i ripped the parts car apart... Here are some pics..i know there not that detailed, ill take better ones when im putting everything in my car.

[A18A]

I wish I had a hoist...

Good job, dude!

u dont need 1 do what wohdog did and use the garage as your hoist

great work there on the car ./

[bullard123]

Looking awesome!! How many miles does the efi engine have on it?

[88Accord-DX]

Good job. I would have done the same. Sort of hard to do EFI swap when there is no junkies for 125 miles. Anyhow, might keep my eyes peeled for what I need.

[A18A]

just noticed how close that hoist is 2 the beema and there being a slight hill, i woulda moved the beema coz i wuda been scared that the hoist woulda roled into it, or does it have brakes?

[carotman]

Looks like you're having fun

[twofast4u]

Looking awesome!! How many miles does the efi engine have on it?

only about 170 000km(were in canada)

[twofast4u]

just noticed how close that hoist is 2 the beema and there being a slight hill, i woulda moved the beema coz i wuda been scared that the hoist woulda roled into it, or does it have brakes?

not that worried, it was goin anywhere lol i made sure it was stable, and yes indeed i am havin lots of fun!!!!

[MessyHonda]

wow...looks like alot of truble...i just got a LX-I with a 5 speed trany for cheap...so cheap i need to rub it in since i didnt feel like taking out my engine from the Dx...lol

[twofast4u]

I bolted in the new motor and removed the old wiring harness and ripped out the interior and removed the gas tank. I still have to drill that hole through the firewall put in the new gas tank, put the interior back together, install the broken window wire up the motor bolt in everything else an then i repaint!!!! Heres a pic of the motor in the car!

[dalinxz]

where did you get the car for $100, seems like an amazing deal, Im in Markham. Want to sell the rest to me, i need the control arm and nonsense things like that!!!

[MessyHonda]

looking good...i was about to do that but then i just saved up the money and got myself a LX-i with all that fun stuff

[twofast4u]

where did you get the car for $100, seems like an amazing deal, Im in Markham. Want to sell the rest to me, i need the control arm and nonsense things like that!!!

I would dude but im using all the suspension/steering components since mine are finished. Wht else u need?