the stock lower radiator mounts are just rubber bushings in 'holes' and the posts on the radiator fits into the bushings.
for his setup he has built pvc pipe 'holes' and put the rubber bushings inside the pipe, and the civic radiator posts will fit right into the bushings which are sitting in the pvc holes.
the reason for needing that is because the spacing between the posts is way off obviously since the radiators are completely different widths.
your install shouldnt be any different than his, except possibly installing your pvc tube solution slightly closer to the firewall side of the engine bay, to allow clearance, but i'm sure that part depends on how exactly you rig up your radiator project.
Bookmarks