SPC performance LCA?
Just saw these on Nopi.
SPC performance, a company I have never heard of makes some pretty nice looking rear lower control arms for our cars, or so nopi says.
link:
http://www.nopionline.com/nopistore/...HONDA%20Accord
Anyone ever seen these or tried em?
My Project thread https://www.3geez.com/forum/project-c...dan-build.html
My Flickr: http://www.flickr.com/photos/jdmca5/
i've never heard of them but i was thinking of making my own control arms for the rear out of tubular steel or maybe get some laser cut like that at my work
gonna miss my 3gee
next project neuspeed jetta
Be careful with nopi, they sold military mase and I rear lower ploy bushings that didnt fit our cars. They were for the 4g accord. When I called and asked them about it, they told me they got the info from the company. I saw those, but I am a little weary to buy them.
Hmm I've never actually seen the 3gees' rear LCA. I've seen the rear UCA and rear trailing arm. Anyways, $81 bux is not bad. Hopefully they make more aluminum suspension parts for the 3gee. A pair of LCA's is not gonna do much good on the suspension by themselves. Would be a waste of money.
Originally Posted by ICEMAN707
Also now that I think of it, dont we have dual LCA in the rear. Here is the picture from honda
Yeah, the only thing I could think of is that that's not a LCA, that's the trailing arm (Figure # 19).
In that case, I'm down for a set of lighter trailing arms!
Yeah, the only thing I could think of is that that's not a LCA, that's the trailing arm (Figure # 19).
In that case, I'm down for a set of lighter trailing arms!
That would be sick, but I highly doubt they would make that for our car. If they did, I would not hesitate to buy a set.
hmm...since iceman said he'd like a some in aluminum i'll see if i can get some routered at work out of 3/8" or something
gonna miss my 3gee
next project neuspeed jetta
Well, I'm not jumping to conclusions myself. Looks like it's missing a few bolt holes and sway bar endlink holes to be confirmed as being the trailing arm. I wish they put the dimensions of that thing on their site. Like you said, watch out for Nopi. Looks can be deceiving when it comes to them, I guess.
I don't even know where the hell this is supposed to go into: http://www.nopionline.com/nopistore/...7 HONDA Accord
Those Nopi guys are on crack or something...lol
il just put in the shims like you guys said...about how many will i need if i drop it 1.5 inches
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
huh? i think you posted in the wrong post dude.
huh? i think you posted in the wrong post dude.
I think he is talking about the washer trick for camber correction. Messy I am not sure, but it shouldent take more then 3 to get the job done.
thanks for clearing that up Legend....yeah il check it out.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
that shim trick works. i'd get longer bolts though just to be safe. if i remember correctly they are 14mm bolts with fine thread (1.25mm thread pitch).
Is this the same company on ebay offering Rear adjustable upper control arms for $149.00 if so sounds like they are putting some R&D for the 3rd gen maybe because its an easy R&D project.
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
I was thinking about trying a set of these.
We'll see.
Phil
i would say that the 1st link in the thread is for a trailing arm
neither LCA looks anything like that or has as many holes for bolts as that does
so id say im 98% sure they are trailing arms
*edit*
im gonna look at my trailing arms on my SEi setup i have in the garage tomorrow and make sure
Posting Permissions
Reply With Quote
Bookmarks