Of 3g accords with working A/C!
After two years of chasing electrical demons, sorting out what all I needed to swap from Keihin to Denso compressors, and chasing down leaks, I finally have working A/C! Maybe not for long, as the whole setup is pretty wonky.
What I'm Currently running is:
R12 Mineral Oil
R134A Refrigerant
Dryer that has been exposed to 2 years of open system (I replaced it when I originally started working on the system)
Expansion valve, same as dryer but not as essential.
Overall, the temps aren't as low as they probably should be, but they are much better than 110F outside. I was getting high 50's, low 60's vent temps at idle.
Next spring I will purchase a new dryer and expansion valve, flush the system, pull a good, hard vacuum, and recharge. Trace down any small leaks I probably have (25 year old rubber after all).
Anyway, thanks for reading.
Bookmarks