Results 1 to 10 of 10

Thread: spring feedback

  1. #1
    LXi User Jasonf860's Avatar
    Join Date
    Jul 2006
    Vehicle
    89 Accord lx, 94 BMW 325i
    Posts
    562

    Arrow spring feedback

    Ok, so i've narrowed it down to either sprint 2.25" drop springs, or Sup. Tech 2/1.9" drop springs. I'll be installing a fresh set of Tokico's w/them. What i want to know is if anyone has used either spring, how their ride was, settling issues, spring quality, and anything else they can think of. I know the tokico's are not stiff enough for them in all reality, but since I rode with tokico's and my DZ coilovers, either of these spring sets should be an improvement in ride quality as they are around 1/2 as stiff as the DZ's. So please, let me know



  2. #2
    LXi User Jasonf860's Avatar
    Join Date
    Jul 2006
    Vehicle
    89 Accord lx, 94 BMW 325i
    Posts
    562

    Re: spring feedback

    Bumpity bump!

  3. #3
    LXi User Jasonf860's Avatar
    Join Date
    Jul 2006
    Vehicle
    89 Accord lx, 94 BMW 325i
    Posts
    562

    Re: spring feedback

    Ok, I installed my Sprint springs and they are way better than the dz coilovers.... Ride is good, handle pretty close to the coilovers...

  4. #4
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: spring feedback

    can you get pics?

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  5. #5
    LXi User Jasonf860's Avatar
    Join Date
    Jul 2006
    Vehicle
    89 Accord lx, 94 BMW 325i
    Posts
    562

    Re: spring feedback

    What would you like pics of? Ride height & the actual spring installed? I'm running them on factory struts right now. I was gonna wait till spring to install them on a fresh set of Tokico's but I couldn't wait to try em out. I will try and get pics this weekend when I have the wheels off to deal with my UCA's.

  6. #6
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: spring feedback

    Quote Originally Posted by Jasonf860
    What would you like pics of? Ride height & the actual spring installed? I'm running them on factory struts right now. I was gonna wait till spring to install them on a fresh set of Tokico's but I couldn't wait to try em out. I will try and get pics this weekend when I have the wheels off to deal with my UCA's.
    both....il do my upper control arms later...

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  7. #7
    LXi User Jasonf860's Avatar
    Join Date
    Jul 2006
    Vehicle
    89 Accord lx, 94 BMW 325i
    Posts
    562

    Re: spring feedback

    Well, since I don't have a digi cam, it's hard to get pics. i am getting one for X-mass and that is not far away so I should be able to get some pics soon after. I can say that these sprint springs ride really nice even with the factory 215k mile struts in there. I can't wait till spring to get some tokico's in there with them. On a side note, ever since i replaced the springs, I have this weird noise on my drivers side rear. I've checked and rechecked all the bolts and bushings. All are good and tight. I also checked the upper ball joint, I can't feel a bit of play in it at all. The only way I can describe the sound is kinda what popcorn popping in a coffee can would sound like. Doesn't make the sound over bumps, but rather just when I am driving on pretty smooth roads, and also more so when it's cold. Any thoughts?

  8. #8


    Join Date
    Nov 2004
    Vehicle
    88 LXi
    Location
    Knoxville TN
    Posts
    5,208

    Re: spring feedback

    Did you put rear uppers on with poly bushings? Mine squeek pretty good and damn bad when its cold out like last night. Sounds like styrofoam or some thing.


    wp

  9. #9
    LXi User Jasonf860's Avatar
    Join Date
    Jul 2006
    Vehicle
    89 Accord lx, 94 BMW 325i
    Posts
    562

    Re: spring feedback

    No, i have no poly bushings anywhere. this sound is driving me nuts! i'm gonna just replace both my rear UCA's and see if that helps.

  10. #10
    Accord of the Year - 2006

    guaynabo89's Avatar
    Join Date
    May 2002
    Location
    FL
    Posts
    4,144

    Re: spring feedback

    The sustech are a little stiffer and the sprints settled in the back a little. Or at least thats what it seems like

Similar Threads

  1. Some feedback..
    By 3rdgenhatchDX in forum 3geez News & Site Feedback
    Replies: 3
    Last Post: 01-03-2007, 12:20 PM
  2. Need feedback plz
    By bc86 in forum Classic Honda Community Chat
    Replies: 13
    Last Post: 08-14-2004, 05:08 PM
  3. Spring Tech Coilover spring rates
    By 89AccordLvr in forum Suspension/Wheels/Tires/Brakes
    Replies: 4
    Last Post: 07-01-2003, 10:28 AM
  4. Amp Feedback
    By xbi0s in forum Interior & Exterior Care
    Replies: 3
    Last Post: 04-06-2003, 04:17 PM
  5. Some Feedback
    By Grant2k in forum 3geez News & Site Feedback
    Replies: 0
    Last Post: 10-11-2002, 09:30 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink