no problem, I am going to get it tuned on 91 octane gas and e85..Originally Posted by Tdurr
I am sure i will post dynos.
no problem, I am going to get it tuned on 91 octane gas and e85..
I am sure i will post dynos.
how much power u looking to make running e85?
Damn son. You aint messing around LOL. thats tight bro
200+ ALL MOTOR LS VTEC
nice work...i cant wait to see vids of your ride
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
nice guys!
On a side note after the cam install the engine has become an interference motor.
I sent A20A1 the cam spec's to put it in the FAQ. 0.451/0.503 lift...
really? so doppin valves isnt a good plan lol
not good at all!
I have to clear coat the engine bay next. The engine is done except for some wiring and installing the injectors. Ill get that done after the engine is in.
edit: never mind watching the paint dry.
Last edited by 89T; 03-13-2010 at 03:53 PM. Reason: update.
update now?!?
update the the tranny is mounted and engine is in...
I'll get some pics in a lil while, I'm dog tired!
I fucked up a axle boot so i'll have to get one tomarrow. I was so pissed...
All this shit is the easy shit too.
On a side note, the o2 sensor wires are sheilded right?
Seeing that I am going obd1 i need extra wires for the dizzy, but I am running the AEM wideband whitch i get the signal from the guage. The wires are useless right now.
I'll have those wires as extra's and also 3 egr wires as extra's.
Last edited by 89T; 03-13-2010 at 08:09 PM.
sorry the shop is a bit dirty...and some of the pic's suck.
Last edited by 89T; 03-13-2010 at 09:33 PM.
Looking good.
I think this is the first time I've seen your Accord
are you sure! I changed my name from 89turbo'ed...
I have/had a build thread in forced induction...
Your right. I have seen It
My memory is starting to go
https://www.3geez.com/forum/showthread.php?t=56557
I went and found a reminder..lol!
that is not the actual first post though...
wtf!
sorry the shop is a bit dirty...and some of the pic's suck.
What kind of injectors are those? And what are the other little pieces?
C|
Looks like the ones that are really expensive.
200+ ALL MOTOR LS VTEC
hi
1988 Honda Accord LX-i Coupe 123k miles.
Those are bosh injectors, ID1000's to be exact. there good for about 1600cc @ 100 psi fuel pressure. the little deals are adapter's for the b seiries intake.
Last edited by 89T; 03-14-2010 at 05:13 AM.
thats why i said really expensive. Those the ones im going to get WHEN i get back on road
200+ ALL MOTOR LS VTEC
hi
What's wrong with you'r car?
x2.What's wrong with you'r car?
and its looking good. what intake is that? skunk 2?
yeah they're shielded.
i see that water to air. I take it you going all aout race huh.
nice bisi cam too. When do you think your going to be done with the new setup?
It's a Skunk2 with a omni 70mm TB.
Great! There's no need to run any new wires in....:biggrin:yeah they're shielded.
i see that water to air. I take it you going all out race huh.
nice Bisi cam too. When do you think your going to be done with the new setup?
I figure I don't drive it often so this is the next step, plus I use to have a passion for drag racing. I lost it along the way and I am trying to get that passion back.. I'll still street it though.
Ill try the air/water intercooler for now, I am sure I'll like it.
I am hoping to be done by the end of the month if money allows.
hmmm i want a intake set up but its alot of money lol.
but i hope its done by the end of the month. should be a kick ass set up.
I got my fingers crossed.
Posting Permissions
Reply With Quote
Bookmarks