Page 1 of 2 12 LastLast
Results 1 to 25 of 50

Thread: Rear Lower Poly shock bushings installed.

  1. #1
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Rear Lower Poly shock bushings installed.

    Well awhile back I purchased the rear lower control are bushing kit for the 3gee off nopi.com. It turns out that the kit is for a 4G and will not work on our cars. I did notice that the bushings in the kit are the same size as the 3gee rear shock bushings. So I removed the factory bushing from my SE-i rear setup (will work with disk or drums) and placed the poly bushings inside. To my enjoyment it fits like a glove. I have two sets left (the kit was for the rear LCA's and came with 8 bushings) and I will sell them for the amount I paid in the market section. SO here are the pics.













    Here is the info on the bushings from nopi if anybody want to group buy a box. Nopi Link

    1989 HONDA Accord
    Control Arm Bushng Kit Honda
    PROTHANE Bushing Kit - Control Arm Unit of Measure: Kit
    Part Number: 432+0066 Core Price: $0.00
    Urethane LOWER C-Arm Bushng Kit - ALL Mdls - REAR - RED
    Last edited by Legend_master; 01-26-2007 at 03:19 PM.
    Complete repair manual <---- (click here)




  2. #2
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: Rear Lower Poly shock bushings installed.

    did you have to press em in?

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  3. #3
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Nope, they just slip in.
    Complete repair manual <---- (click here)


  4. #4
    Accord of the Year - 2009

    thegreatdane's Avatar
    Join Date
    Jan 2003
    Vehicle
    Accord 2.0i-16 '87 - Accord Aerodeck EXi '89
    Location
    Denmark/Europe
    Posts
    2,898

    Re: Rear Lower Poly shock bushings installed.

    They might well develope play if the fit isnt snug enough to require being pressed in.


    Link to my 3geez garage
    • Accord 2.0i-16 '87 B20A2 DOHC 16v
    • Accord Aerodeck EXi '89 Exclusive Edition

  5. #5
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Quote Originally Posted by thegreatdane
    They might well develope play if the fit isnt snug enough to require being pressed in.

    but the only forces on them will be up and down. How could they play back and forth?
    Complete repair manual <---- (click here)


  6. #6
    Accord of the Year - 2009

    thegreatdane's Avatar
    Join Date
    Jan 2003
    Vehicle
    Accord 2.0i-16 '87 - Accord Aerodeck EXi '89
    Location
    Denmark/Europe
    Posts
    2,898

    Re: Rear Lower Poly shock bushings installed.

    Excactly, up and down. Vertical play is what I meant. But cant say if it will be a problem, time will tell I guess.


    Link to my 3geez garage
    • Accord 2.0i-16 '87 B20A2 DOHC 16v
    • Accord Aerodeck EXi '89 Exclusive Edition

  7. #7
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Actually it fit very well and there is no play up and down. It just dosent have to be pressed in. check out these pics.



    Complete repair manual <---- (click here)


  8. #8
    SEi User
    Join Date
    Feb 2004
    Vehicle
    86 Accord LX -EFI OBD1 Turbo, 2006 Ram 1500
    Location
    Panama City, FL
    Posts
    1,401

    Re: Rear Lower Poly shock bushings installed.

    Nice work. I may have to pic up a set of those from you.

    Pgm-fi conversion 4-16-05
    OBD1 11-25-06
    Turbo 2-26-07
    Tuned with eCtune 239whp 237wtq

  9. #9
    3Geez Veteran ghettogeddy's Avatar
    Join Date
    Jan 2006
    Vehicle
    88 lx sedan (R.I.P.) / 89 LX sedan(sold) / 89 lxi parts car(towed away) / 87 lxi hatch
    Location
    Antioch CA
    Posts
    9,591

    Re: Rear Lower Poly shock bushings installed.

    how much lol
    i need to re dp all mine thought lol front and rear

  10. #10

    Cheeseburger's Avatar
    Join Date
    Apr 2003
    Vehicle
    1989 honda accord Lx ( cheeseburger mobile) 1989 honda accord Lx-i ole blue
    Location
    Los Angeles
    Posts
    3,355

    Re: Rear Lower Poly shock bushings installed.

    how do they feel?

  11. #11
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Quote Originally Posted by Cheeseburger
    how do they feel?

    They have not been installed on the car yet.

    Quote Originally Posted by EricW
    Nice work. I may have to pic up a set of those from you.
    Thanks, I have one set left.

    Quote Originally Posted by ghettogeddy
    how much lol
    i need to re dp all mine thought lol front and rear
    $20 + shipping, no paypal
    Complete repair manual <---- (click here)


  12. #12

    Cheeseburger's Avatar
    Join Date
    Apr 2003
    Vehicle
    1989 honda accord Lx ( cheeseburger mobile) 1989 honda accord Lx-i ole blue
    Location
    Los Angeles
    Posts
    3,355

    Re: Rear Lower Poly shock bushings installed.

    dope let us know how it gose!

  13. #13
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Bumped installed on the car.

    Complete repair manual <---- (click here)


  14. #14


    Join Date
    Sep 2004
    Vehicle
    ???? ????? ???? ?? ???
    Location
    On Hiatus
    Posts
    4,276

    Re: Rear Lower Poly shock bushings installed.

    Sweet!
    2004-2011?

  15. #15
    3Geez Veteran HondaBoy's Avatar
    Join Date
    Aug 2002
    Vehicle
    '01 BMW 740i,'87 Accord,'02 Accord EX-L,'76 Datsun 280Z,'05 Subaru Legacy GT*R.I.P.*
    Location
    Home of the Whataburger, Texas
    Posts
    5,540

    Re: Rear Lower Poly shock bushings installed.

    looks good. just how long did it take you to get these parts? last i ordered from nopi, it too 10 weeks for my header to get to me. good part though.
    Keep it HONDA. Or at least Asian.™
    *Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
    B18C swap ditched, A20 to be revived
    Looking for K20/trans for ultimate swap

  16. #16
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Quote Originally Posted by HondaBoy
    looks good. just how long did it take you to get these parts? last i ordered from nopi, it too 10 weeks for my header to get to me. good part though.

    I believe it only took a week or so, but all the prothane was ordered through nopi and shipped directly from prothane. So I believe all there availability is based on how much stock they have of the particular item.
    Complete repair manual <---- (click here)


  17. #17
    LXi User
    Join Date
    Jan 2003
    Vehicle
    1986 prelude
    Location
    charlotte nc
    Posts
    948

    Re: Rear Lower Poly shock bushings installed.

    well i stil have yet to c a front lower control arm poly bushings installed or anybody do it im very intrested n doing it.
    rhd restoration 2nd gen prelude

  18. #18
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Quote Originally Posted by b20a86lude
    well i stil have yet to c a front lower control arm poly bushings installed or anybody do it im very intrested n doing it.

    Actually fallow the link for my car in my sig and go to my suspension thread. I have them installed.

    Edit:here you go
    Last edited by Legend_master; 01-30-2007 at 04:26 PM.
    Complete repair manual <---- (click here)


  19. #19
    LX User P|eszczoH's Avatar
    Join Date
    Nov 2003
    Vehicle
    2 x 1989 Honda Accord Aerodeck 2,0i Exclusive Edition(lather, and one with A/C)
    Location
    Warsaw, Poland, Europe
    Posts
    276

    Re: Rear Lower Poly shock bushings installed.

    Legend Master,
    Can You measure them up ?
    lenght, diameter, also the collar lenght, and inner outer diameter.

    We will see if it's like the oem honda one, or not.


    have a nice ride
    P|eszczoH

  20. #20
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Quote Originally Posted by P|eszczoH
    Legend Master,
    Can You measure them up ?
    lenght, diameter, also the collar lenght, and inner outer diameter.
    We will see if it's like the oem honda one, or not.

    Thats the best I can do.

    Complete repair manual <---- (click here)


  21. #21
    LX User P|eszczoH's Avatar
    Join Date
    Nov 2003
    Vehicle
    2 x 1989 Honda Accord Aerodeck 2,0i Exclusive Edition(lather, and one with A/C)
    Location
    Warsaw, Poland, Europe
    Posts
    276

    Re: Rear Lower Poly shock bushings installed.

    Legend Master,
    Could You use a tool like this ? http://pl.wikipedia.org/wiki/Suwmiarka

    or just get those numbers with what You have. I don't need pictures, I nned numbers. I will try to get oem honda numbers tomorow, and we will be able to check them.
    like i said, the diameter that You tried to show here, the lenght would be nice to
    and if You can the collar outer diameter.


    have a nice ride
    P|eszczoH

  22. #22
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Quote Originally Posted by P|eszczoH
    Legend Master,
    Could You use a tool like this ? http://pl.wikipedia.org/wiki/Suwmiarka
    or just get those numbers with what You have. I don't need pictures, I nned numbers. I will try to get oem honda numbers tomorow, and we will be able to check them.
    like i said, the diameter that You tried to show here, the lenght would be nice to
    and if You can the collar outer diameter.
    Bushing Diameter = 1 7/16"

    Bushing and collar Length = 1 5/4"

    The collar is the same diameter as the as the bushings.
    Complete repair manual <---- (click here)


  23. #23
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: Rear Lower Poly shock bushings installed.

    any ideas for the big trailing arm bushing?
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  24. #24
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: Rear Lower Poly shock bushings installed.

    Quote Originally Posted by SQ is the SQUAD
    any ideas for the big trailing arm bushing?


    Look at the G2 integras and G3 preludes, that would be the only application I would think to be similar and have that kind of aftermarket support.
    Complete repair manual <---- (click here)


  25. #25
    LX User P|eszczoH's Avatar
    Join Date
    Nov 2003
    Vehicle
    2 x 1989 Honda Accord Aerodeck 2,0i Exclusive Edition(lather, and one with A/C)
    Location
    Warsaw, Poland, Europe
    Posts
    276

    Re: Rear Lower Poly shock bushings installed.

    Quote Originally Posted by Legend_master
    Bushing Diameter = 1 7/16"
    Bushing and collar Length = 1 5/4"
    The collar is the same diameter as the as the bushings.

    Sorry for the delay.
    Thanks to TheGreatdane we can see this:



    40mm = 1,57 inch
    26mm=1.02 inch
    37,1mm=1,46inch
    10mm=0.39inch
    Last edited by P|eszczoH; 02-18-2007 at 11:26 AM.


    have a nice ride
    P|eszczoH

Similar Threads

  1. Rear lower shock bushing part number
    By G. White in forum Suspension/Wheels/Tires/Brakes
    Replies: 3
    Last Post: 03-03-2012, 06:37 PM
  2. Poly Rear LCA bushings - do they fit?
    By Nafs Asdf in forum Suspension/Wheels/Tires/Brakes
    Replies: 25
    Last Post: 05-23-2010, 07:35 AM
  3. Rear Shock mount bushings? Options?
    By AccordEpicenter in forum Suspension/Wheels/Tires/Brakes
    Replies: 15
    Last Post: 01-21-2008, 05:05 PM
  4. Rear lower control arm shock bushings
    By possum in forum Suspension/Wheels/Tires/Brakes
    Replies: 8
    Last Post: 11-03-2004, 07:54 PM
  5. Rear sway bar poly bushings (LXi)
    By possum in forum Suspension/Wheels/Tires/Brakes
    Replies: 5
    Last Post: 10-16-2004, 02:11 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink