teg spindle set-up

[ACE_14]

Did anyone ever try this?

[89T]

Gio is supposed to, but he is dragging ass.

[ACE_14]

I was giving this some thought, if the 88-89 lxi uses the same caliper as the teg, the rotors should be the same right?

If so, then what ever brake kit is available for the teg is theoretically available for the 88-89 lxi???

[ShyBoyCA6]

I was giving this some thought, if the 88-89 lxi uses the same caliper as the teg, the rotors should be the same right?

If so, then what ever brake kit is available for the teg is theoretically available for the 88-89 lxi???

Well the rotor is slightly bigger. the 2nd teg rotor is 10.3" and the accord is 10.2" Not sure if i got the teg info correct but yeah. i think someone mentioned an offset?

[cygnus x-1]

I was giving this some thought, if the 88-89 lxi uses the same caliper as the teg, the rotors should be the same right?

The rotors are the same diameter but the offsets are different.

If so, then what ever brake kit is available for the teg is theoretically available for the 88-89 lxi???

In the front, basically yes. The 'teg rotors have a smaller offset, so to use them you would need to add some washers or something to space the calipers out from the knuckle. The difference should be approximately 7mm.

The rear is an entirely different story of course.

C|