Hope you get some more work done soon!
Hope you get some more work done soon!
Keep that Vigor grille.
Do not swap to an Accord one. This is a Vigor after all![]()
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
i done some work today, just temporary work though
1 of my fogs aint working either so they had to come out
can someone help me get that plate off? screws are rusted badly on both bumpers![]()
Just drill them out. Shouldn't be hard if they are rusted
i was thinking that, but i dont have a drill (or access to one either) i was just thinking of snapping them off and using the outter holes, hope it wont look too ugly =/ lets just see what time brings us
looks like it has a black eye
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
nah, shes just recovering from one, hence the blue bruised eye![]()
put ice on it
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
i cant close the boot aka trunk![]()
send me your passanger(driver on your side of the world) side visor off your parts car...
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
$$$ first![]()
Thats how you conduct business OD lol
how about if i sent you cupholders?
i want JDM folding mirrors and the visor thingy
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
hmmmmm, ill get back to ya on the mirror thing
yup...i already have 6 cupholders...on a 5 passanger car...lol leting 2 go would not hurt...lol
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
lol has the same problem`its just the latch A is laching it self or is not ketching.... hard to exsplane esayer to show you wish i had just come out to visit you instead in some ways........ o wellOriginally Posted by Overdosed A18A
![]()
^^well i done that, it's masked the problem, it will have to do for now..
anyways i cleaned out the car, what a time that was, took most of the day, and there is still heaps of glass inside, any tips on how to remove it all? last time i used a vacuum cleaner, it destroyed the bag inside so thats not a option
anyways here's the before:
and after:
i know its not done but i spent a few hours just getting it like that (as you can see the first pics it was bright daylight and the after ones was dark)
and only got 7 cuts while cleaning all that shit![]()
Originally Posted by Overdosed A18A
![]()
![]()
2004-2011?
Damn, you must be feeling pretty good about all that!
damn od you striped it down to the frame...lol
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
haha yup, the sucky part is knowing that I'm only half way there lolDamn, you must be feeling pretty good about all that!
yup, all that A/C stuff is comming out too, i think i might buy that F1 interior while im at itdamn od you striped it down to the frame...lol![]()
so yeah today i bought 2 cans of paint, 2 cans of clear, 1 big-ish can of primer, 2 cans of crc, 2 cans of degreaser some oil and a oil filter
i started off by degreasing the valve cover, what a great job it done toothen decided to wash the whole engine, and then i swapped in good battery cables @ battery, then done a oil change, what a bitch that was, couldnt get the filter loose at all so i just stabbed it and turned it with the screw driver
and then i replaced the extra rear speaker that didnt work..
the camera flashed and brought out the worst of the engine bay, but it is much cleaner in person
oh yeah, i also took off that heat shield, the rust spots were annoying me too much![]()
Good job! Now sand that heatshield and stick it back on
Clean and Sexy.![]()
Bookmarks