Almost ready to turbo

[LiTtLe xOx BitT]

The turbo kit is the turbo, intercooler, BOV, waste gate, charge piping, oil lines, ect. The manifold and downpipe are made by justin.

[MessyHonda]

Update on parts list:
1. Turbo kit $820
2. Manifold and downpipe $500
3. ARP head studs from mazda miata 2.0L $108
4. Rebuilt head and B18 intake manifold $230
5. Engine rebuild parts (all new gaskets, King rod bearings, new main bearings, new piston rings, OEM pistons) around $200
6. DSM 450cc injectors, clips and resistor box $100
7. Walbro 255lph fuel pump $100
8. NGK plugs $10
9. MSD blaster 2 coil $40
10. Vortech BTM $179
11. SAFC $100
12. Clutchnet red 2x pressure plate and kevlar solid hub clutch disc $383
Total for now - $2770

where did you order the ARP head studs? got a part number?

[LiTtLe xOx BitT]

where did you order the ARP head studs? got a part number?

The ARP head studs are for a 2.0L miata part# 218-4703 i beleive.

[AccordEpicenter]

sounds correct, thats what i used on my accord

[bobafett]

same here

[LiTtLe xOx BitT]

UPDATE. My SAFC should be here by the end of the week. I now need to get new main bearing cap bolts to finish this motor, its so fustrating. I went to hondapartsunlimited.com and they are asking like $58 shipped for the set of 10, is that a good price? is there anywhere else i can get them cheaper or faster? Heres what im talking about, its part #20 http://www.hondapartsunlimited.com/s...omp=List%20All . With all this bad weather in PA its been really hard to work on the car, im hoping to get to do something this saturday. Im going to try and atleast get the battery re-located to the trunk, remove the P/S and mount the intercooler this weekend.

[LiTtLe xOx BitT]

Well the safc has arrived and it looks like its in really good shape. I also ordered the main bearing cap bolts that should be here soon. And again i ran into a few problems so i need to push back the install date, this is a pain in the ass.