Climate Air Controls Conversion!

[Steve_Si]

Probably the 87-89 models have an upgraded loom throughout the car. Wires in place for folding mirrors and climate controls.

[carotman]

Well, I'm moving thes thread up so I can finish up the project.

I know I'm missing some parts like the vacuum actuator, the sensor above the dashboard and the little fan in the center console. Anyone has these?

[AccordB20A]

i had no idea this thread existed. i also had no idea the climate control came in two types

[forrest89sei]

And thats why we have 3geez my friend

[A18A]

if i ge tthis other car i'm after, then i can tear down my vigor and try again

[AccordB20A]

i recon your problem is that ur cars a vigor, the climate control that im TRYING to sell is from a 1988 fixed headlight model and its the same as the climate control in my 1985.

I know I'm missing some parts like the vacuum actuator, the sensor above the dashboard and the little fan in the center console. Anyone has these?

i would but im selling the whole thing complete.

[Steve_Si]

It'll work just fine without the centre console fan thing or the sensor on the dash. Not sure about the vacuum actuator though

[A18A]

i recon your problem is that ur cars a vigor

what do you mean :-|

[A18A]

i can start tearing apart my vigor now for this project now that i got a better car lol yay

[carotman]

Yeah!!

I need help to wire mine

[AccordB20A]

okay well to sort this out u gta wait till 3gmodifier recieves the climate control i sold him. he has the whole complete thing and all sensors out of the car and even the heater core boxes and blower so if anyone is gunna get it going it will be him.

[3gmodifier]

hey there. i just wanted to let you know that i had bought the complete digi climate control set up from wohdog. i got it all the other day and layed everything out. i set it all up in the coupe and pluged everything in. but i cant get power. i cant figure out ware it gets its power from. and there is a little brown computer brain controller thing on the bottom of the blower. i have no plug to plug into it. there is also a second half to the harness that goes to the engine bay. there is a big 8 pin plug. my accords have no such plugs. i went back and read this post and i realized that this setup is from a fixed headlight model, so that explains why i cant find the plug. what does this plug do and do i need it to power the system up? and after all of the actuators, and main controller is plugged in i am left with a small 3 pin plug that is next to the controllers plugs, and a couple of small plugs down by the blower. so what i wanted to know is do i need more of the interior dash harness to the fuse box to get the rest of the plugs i am missing. i dont wanna have to cut and splice. and even if i had to i cant because i have no clue what wire needs what. if any one has this setup factory, can you run through the system and mark down what goes ware? i need to know what i am missing. thanks

[3gmodifier]

ok. i got a little bit more info from looking at all of the differant pics on the board. i have a some what better idea now. i am gona do another mock up today and see what i can figure out. i will keep everyone posted but help is still appreciated.

[AccordB20A]

http://imagehost.wohdog.sytes.net/di...limatecontrol/ thats my pics and wires

[AccordB20A]

oh and that unknown sensor goes in the AC radiator its a temperature sensor for the air thats coming out of the vents