Well, my run channel on the driver side (the front run channel) is all scrunched up. So, I can only roll the window down so far because the felt material is "balling" up, preventing the window from going any further. OF FUCKING COURSE, the channel AND the material inside the channel are no longer available. So, I have to get a used one, fabricate something, or find a new OEM one NOS. Ebay has a couple channel material pieces available BUT they are for the "exposed" portion in the door. That would be the part that keeps the window tight when it is rolled all the way up. Do you think I could cut a piece of that and put it in the run channel that is actually inside the door, behind the door panel? It's going to be a delicate situation because the material has to be tight, but it can't be rubber or just soft cloth. If any of you guys know if my idea will work, lemme know. My run channels are good, it's the sash/liner that is coming apart. Honda and their run channels and HORRIBLE product support for the older stuff is just wonderful.
If you guys have any access to 84 or 85 Accords for parts... The run channels are specific to the 3 doors (like I have) and sedans, but the insert that I need is the same for all body styles. Thanks!