Any body no were I can find a set of under drive pulley's
for a A20
Any body no were I can find a set of under drive pulley's
for a A20
Originally Posted by josephgilpin
Any body no were I can find a set of under drive pulley's
for a A20
none where made....but i did hear over at prelude power that some one ran a bigger pulley for the water pump...also a friend has a under drive crank pulley but it had to be custom made our of aluminum
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Dont think they exist... What are you trying to do?Any body no were I can find a set of under drive pulley's
for a A20
your local machine shop.Any body no were I can find a set of under drive pulley's
for a A20
must be custom made.
if your not planning on going too deep int tohe engine dont bother and focus elsewhere.
If there is someone good enough to machine you a couple they sholud look somethign like this.
Hrm, next golden eagle group buy?
- llia
^^^ Hell yeah to that
Honda Parts Connection -- http://www.acurahondaparts.com
D Series Army Dishonorable Discharge
BT Defector
How much did that pulley cost? looks fancy
yeah and i want one too.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
lol @ u guys
Back in the day(like 98-99) I found a great guy that had a machine shop and could basicly make me anything as long as I made him a picture with measurements or a sample piece.
At the time he charged me 180.00 for the crank, power steering, and alt pulleys. After he made it though he said the crank was such a difficult piece to make just the labor for it was well over the 180 I paid him! lol
It looks so nice in person though I didnt even want to install it!
And before everyone starts with the whole balancer thing, this piece along with my whole rotating assembly is balanced up to 9000 rpm.
The stock pulley is just a cast piece and has no dampening properties whatsoever.
lol @ u guys
Back in the day(like 98-99) I found a great guy that had a machine shop and could basicly make me anything as long as I made him a picture with measurements or a sample piece.
At the time he charged me 180.00 for the crank, power steering, and alt pulleys. After he made it though he said the crank was such a difficult piece to make just the labor for it was well over the 180 I paid him! lol
It looks so nice in person though I didnt even want to install it!
And before everyone starts with the whole balancer thing, this piece along with my whole rotating assembly is balanced up to 9000 rpm.
The stock pulley is just a cast piece and has no dampening properties whatsoever.
i need to find some one like that over here. 180 is a great price for all of that work.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
yeah whats the shops name? i'll drive to orlando for that! and pay him more than 180 just for the crank pulley.
I'm for that, after I recoup from this cam gear buy.Hrm, next golden eagle group buy?
Phil
Unfortunately youll have to do more driving than that!
Hes actually in Pennsylvania, in the Allentown area. Ive found people here that do good work with alum but none that will do as good a job as that man up in PA
to the op: i completely forgot about this, and apparently so has everybody else. there is exactly one underdrive pulley for sale for the a20 engines from the openloop coupe. here's the thread: https://www.3geez.com/forum/showthrea...t=53419&page=2
i called dibs on that long long time ago.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
That one could be lightned more if it had the holes drilled in it
It would be nice to have the PS and AC belt grooves removed in the process, less material.
- llia
You need some of these wonder if honda still make them!!
Original 2G lude DL 1.8 carbed pulley would be pretty simple to replicate in ally as well i would imagine might have to look into that actually!!
Posting Permissions
Reply With Quote
Bookmarks