I feel that with some machine work to the flywheel. A b-series clutch is very doable.
Sent from my SM-T800 using Tapatalk
I feel that with some machine work to the flywheel. A b-series clutch is very doable.
Sent from my SM-T800 using Tapatalk
un-motivated!
someone make me an offer i just could not say no to.
3GR
Flywheel and clutch fit but dose need a spacer and it also doesn't have the same tooth count on the inputshaft. But I'm working with a buddy on get A2B plate. I was about to get a hold of the last know person to own the one and only plate made and he's but really helpful.
Sent from my SM-N920P using Tapatalk
Use the a-series flywheel and machine off the ears where the a-series pressure plate bolts to. Then re-tap with the b-series pressure plate. That takes care of the pressure plate problem. For the clutch Tim has a guy that could possibly work the tooth problem and or just beef up a clutchnet.
Sent from my SM-T800 using Tapatalk
un-motivated!
someone make me an offer i just could not say no to.
3GR
Its would cost just as much to have the plate made. And you don't have to do anything but bolt things on once you have one. Also the a series trans parts are becoming harder to find.
Sent from my SM-N920P using Tapatalk
Bookmarks