Just some photos of the slow as shit progress. 5 speed awd in fits way better than I planned in many way but still a bit of work to be done.
First I'll have to choose how much of the crv shift mount I'll use or none at all. For the most part the shifter could be made to work but cut some of the stock area for clearance and then drill nee holes to bolt it in place. But if you got the extra mile you can cut and weld the crv mount in place.
Then I'll have to cut a hole in the fire wall near then bottom to run the cables for the shift you can see in the photos the cables make up through the stock shifter hole bar are just a bit short. This is were the trimming to make the shifter fit come in to play. Once the shifter has room it would probably work with out cutting the fire wall. But cutting the fire wall would shorten the route by about a inch or so making then rech a bit better. Either way you have to cut something.
Continues next post ...............
Sent from my SM-N950U using Tapatalk
Bookmarks