HOWTO: Install Timing Window Cover

[2ndGenGuy]

This is a super-complicated procedure that I thought I'd document. This applies to 2g's, 3g's and Preludes too!

Step 1: Order part number 11109-PC6-000 from your Honda dealer.


Step 2: Remove item from package. It should look like this:



Step 3: Locate missing item in your bellhousing. It's that hole where you usually do your timing.


Step 4: Insert cover into window. This part is complicated as you don't want to drop it onto the floor! It might require you to sort of push it in one side at at time! Be careful!


Conclusion: This mod can take a very long time! Up to 3 whole minutes. I know it's a complicated process, but take your time, and be careful. You too can do this performance mod to help keep grease and grime out of your bellhousing so you can keep your timing marks visible.

[Hazwan]

lol @ your steps.

mines missing too

[Pico]

Excellent Write Up.
I think this applies to the 3rd gen also

[A18A]

i wish this existed 1 year ago

[ahmad89]

Could some write up a how to or pm me a how to for tubing windshield nozzle sprayers? my tubing is really old and pieces are missing, i just need to know the size and length of the tubing and i plan on running it directly from the pump to then nozzles. Thanks.

[MessyHonda]

dude im going to do that mod tomorrow....il prob get 2 since i bet both of mine are missing.

[che3wy]

HOLY HOT DOG BATMAN

haha i've been looking for this piece for a long time. omg i love you

[2oodoor]

crap i just wasted five minutes of my life

I thought this was the cool timing belt cover peak a boo mod....

[A18A]

^hehe i thought it was too

[2ndGenGuy]

Haha, it was more of a joke than anything. What's the timing belt cover peek a boo mod? Is that where you cut a hole in the timing belt cover so you can see your cam gear?

[MessyHonda]

Haha, it was more of a joke than anything. What's the timing belt cover peek a boo mod? Is that where you cut a hole in the timing belt cover so you can see your cam gear?

yeah like my sig

[offthahook]

You're the man! This procedure applies to a lot of Hondas I'm sure, but this part number covers Accords 84-9 and Ludes 83-7.

You forgot to mention the need for a wrist grounding strap and anti static bag. Plus, it has to be 72 degrees F for this mod to seat right! One use sterile gloves are recommended as well.

[lostforawhile]

Haha, it was more of a joke than anything. What's the timing belt cover peek a boo mod? Is that where you cut a hole in the timing belt cover so you can see your cam gear?

I did the hole in the timing cover years ago,i have a lexan window in mine. i might consider molding an upper timing belt cover piece out of clear acrillic resin one day,like the clear dis caps. as far as the other "mod" he forgot the high dollar special imported from japan honda sealant to make sure you don't lose that expensive part. LOL just kiding

[2ndGenGuy]

LOL

Yeah I hope you guys are kidding about really hoping for a howto on cutting a hole in your timing belt cover. That would be about as rediculous as this "mod"

[ckhaing]

mine is missing. i did not know that there is such thing until today. thanks

[ckhaing]

HOLY HOT DOG BATMAN

haha i've been looking for this piece for a long time. omg i love you

did you find the part? i have not been able to find online

[RI86DX]

Last online 9 years ago
Anyways look on Ebay..wow not even one douchebag selling one NOS one for a few hundred bucks, and all these dodgy third party sites that show up on google don't have it either...find someone insane enough to fabricate one or live without it

[conozo]

Dont need it, any water that gets in there drains out of the bottom anyways.

[RI86DX]

Yup, it's completely fine to be missing it.