what would be considered the best way to kill my new engine? ive gotten quite bored of the A20 and would like to try something new for a change despite not even having the accord running.
what would be considered the best way to kill my new engine? ive gotten quite bored of the A20 and would like to try something new for a change despite not even having the accord running.
drain ALL the fluids and do a fat ass burnout
tape it..and then post the vido on the net somewhere :-D
Go down the street at 90 MPH then shift into 2nd.
Shoot IT!
LoL to the second gear.![]()
another one down lmao
Just sell the motor.
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
see a doctor
give to the needy
+1Originally Posted by roodoo2
so far, the NOS idea sounds like the best idea.
i just need to find a place that will do custom axles before i do any of that. and i need to find an H23 bottom end and an H22 top end
sell it and make a quick buck :p
That would be devastatingly fun. I'd be curious as to how long the engine would last. It's the plan for the ES2. Except I'm going to just run a 50-75 shot. Just enough to pwn some people and still get a full night use out of it.Originally Posted by guyhatesmycar
Remove the oil pan, drain the radiator fluid, and try the second gear thing at the very end.
yea, not bad, go out like a rock star or an SNL comedian... oh and find a hondawhisperer to psyche it up first, promise it 17 virgins, anything..Originally Posted by guyhatesmycar
I say you remove the header and all intake piping. Then remove everything not needed to make the car run. Then try pumping propane/natural gas into the intake while driving. Also try running the car with diesel fuel, that should be an intersting experiment. Also try seeing how high you can rev it before she pops.
use a large shot of nitrous. I would make it a wet kit and go racing and see how fast you can go before it blows. You need at least a 150 shot, id reccomend a 200+ shot. Fucking around with draining the oil and antifreeze etc takes a while to kill the motor. Weve done that and somtimes it can take an afteroon. Im more into large spectacular failures. It wont be any fun until you throw a few rods through the block
429whp 362wtq A20 TURBO. A20T>*
I 2nd the Nitrous part, just try not to kill yourself. lol
Make sure you have a fire extiguisher on hand, just incase.
You better video it too! I wanna see this thing go out with a bang! I wanna see a rod go through your hood! that would be awsome!![]()
lol nitrous explosions are alot of fun. I recall a time seeing a nitroused neon overrev on spray and shot orange and blue flames from around the hood lol.
429whp 362wtq A20 TURBO. A20T>*
find a really steep slope, drive the car in 1st gear and see how high it revs.
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
u should do the nitrous thing but do it while its on a dyno so we can see some numbers
yeah i like that idea also. That or the dragstrip.
429whp 362wtq A20 TURBO. A20T>*
pour coarse sand and oil mixture in the enginemake like a 5:3 sandil ratio and just drive it....fast
give er balls until she stalls...then gas er up again!
Send the car to me, i'll not only ruin your engine i'll give the car a new body style and extreme camber if you know what i mean. Wink Wink.(i
ll wreck the car)
wastegateless turbo will be the fastest and most glorious way to go!
really? how about a turbo and take out the pins or whatever holds the pistons in place? Or loosen the lil fan in the turbo.Originally Posted by bobafett
Bookmarks