Vacuum Holding Cannister
i finally got my stupid pictures to upload by some miracle.
anyway,here are some of the vaccume storage bottle for the power brakes.
the firewall feed through i made,this bolts to the firewall
here is the bottle and the aluminum brackets i made to hold it in place
sorry about the condition of the carpet,it's going to be replaced anyway,and sorry about the blurry image,still trying to get used to the focal length of this camera
this mounts the floor behind my seat
cool
1988 Honda Accord LX-i Coupe 123k miles.
going to try and hook up the lines today
what does it do
oh, i anticipate some vaccume problems with the dual carbs and the other cam going in,this helps store vaccume for the brake booster,so your booster always has enough vaccume even if you have a lower then normal manifold vaccume. there was no where to mount it under the hood,so it's mounted behind my seat,no one can sit behind me anyway with the seat all the way back.
that does it,my tax refund check will be here in a week,auto carpet originals HELP!!!!
hey let me know how that works, I really need something like this after all the work on my motor even with a stock cam i only pull like 12 in/Hg
it should work good,people have been doing it for years,if you use it for your power brakes,you t it into the line then the check valve goes into the line before the t,in other words the vaccume input on the booster and the bottle are attached together. if you don't want to fabricate one,you can buy one ready made from summit racing,or jegs.Originally Posted by bobafett
hey let me know how that works, I really need something like this after all the work on my motor even with a stock cam i only pull like 12 in/Hg
some more pictures of the vaccume bottle being installed
feed through from the inside,carpet is pulled back,one day i'll get my pedals installed.
bottle behind the drivers seat
AN T fitting installed in engine compartment
firebraid line from feedthrough to t fitting from underneath
i realize the check valve is on the wrong side of the bottle,i just wanted to keep rainwater out,since it started raining again. i will fix it later
Last edited by lostforawhile; 07-09-2007 at 03:45 PM.
you're a madmanthat vaccum bottle thing is like an analog hack hehe.. pretty cool
what is an analog hack?
Doesn't the brake booster have to have a vacuum accumulator built in to it?
ICHIBAN!
"Now, even more better!"
it stores some,but not very much,i'm also going to use some vaccume actuators inside of the car,and this will also store vaccume for them when the car is off. some future projects.
The 2g's actually have a vacuum bottle located under the cowl, it's plumbed into the HVAC controls, I never knew it was there until I removed the cowl grille for painting. I'm sure I have a spare, you want it?
ICHIBAN!
"Now, even more better!"
that's pretty awesome, i must say
with the one i installed,i doubt i'll need another one,lol,but thanks. this one will probably hold enough vaccume for 5 cars.
I redid a couple of things and temp hooked up the line for testing
feedthrough at firewall side
[IMG]http
T fitting in brake line engine side
feedthrough interior side,i was able to get the one i made, to fit properly,after some additional machine work.
testing for leaks
Last edited by lostforawhile; 08-14-2007 at 12:17 PM.
Posting Permissions
Reply With Quote
Bookmarks