does anyone know what i need to change to put my prelude wheel in my exi.how do i hook up wheel w/o cruise. do i need to change combination switch or what.
prelude wheel
does anyone know what i need to change to put my prelude wheel in my exi.how do i hook up wheel w/o cruise. do i need to change combination switch or what.
is the prelude wheel from a 3rd gen lude?
mine was plug and play even with the cruise control
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Yeah if you don't want cruise control, remove the 2 wires from the connector and remove the whole switch assembly on the steering wheel. Then you will have 1 wire left which is for the horn. So just plug that into the connector on the slip ring and you should be fine.Originally Posted by MessyHonda
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
another thing if you dont want cruise control, dont press the buttonsi want me a 3g lude steering wheel
on the 3rd gen wheel you cant really remove the switch as its built in to the shape of the wheel.
here is a pic of mine
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
my wheel is out of an 86 or 87 prelude,it fit fine in other car but it didn't have cruise.my other car had the horn contact on the combination switch and a plate on the wheel.so do i take the plug off my wheel and take the plate off the prelude wheel and plug the leads on the wheel to make the horn work.
Posting Permissions
Reply With Quote
Bookmarks