Look at my Grande B20a Turbo
This is KKK K27 Turbo
TURBO SPEC:
INLET 2.75"
OUTLET 2.75"
BEARING TYPE WET FLOAT BEARINGS/ oil cool
OIL INLET 1/8 NPT
MAX PSI CAPACITY 35PSI
Compressor Wheel : .63 A/R , IND: 49.15mm , Exd 80.84mm , Trim: 36.9
Turbiner Wheel : .87 A/R , Ind: 67.16mm , Exd: 78.85mm , Trim: 78.4mm
FLANGE TYPE T3 FLANGE
DOWN PIPE FLANGE TYPE 6bolt standard
Last edited by TWOLOUDNPROUD; 09-06-2007 at 05:49 PM. Reason: opps
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Holy 3geezus!!
haha for a second i thought that red paint was A glowing hot turbo
yeah the red paint looks alot like red hot metal, but aluminuim doesnt heat up like that, if it got that hot it would have melted and your turbo would no longer function. i must say ur turbo setup is pretty "grande"
dude lol can the 3gee's exhaust power that lol ? what are you trying to do race the local mustang owner's club
First Accord 88LX R.I.P 7-19-07 (Might be Jolted back to life at least temporarily)
Seeking another but only with 5-speed I'm joining the Darkside
89LX or SE-i(yeah right)
Originally Posted by DDRaptor
dude lol can the 3gee's exhaust power that lol ? what are you trying to do race the local mustang owner's club
much like Ricky Bobby he want's to 'go fast'
it a B20a it can do itdude lol can the 3gee's exhaust power that lol ? what are you trying to do race the local mustang owner's club
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Nice setup man! Is that your spare B20A you're turboing?
damn Spare B20 sheez.
First Accord 88LX R.I.P 7-19-07 (Might be Jolted back to life at least temporarily)
Seeking another but only with 5-speed I'm joining the Darkside
89LX or SE-i(yeah right)
Yeah I think Tommy has has a total of 3 B20A's so far. And he found me a 5speed tranny for mine
SWEET!!!
Man thats gonna be fast
2004-2011?
its an upgrade to what you had before correct?
to many non runnign turbo cars on this board! lol
Whoa, that thing is going to give you mad boost!
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
yes it is
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
yes
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
That what i hoping it will do.And i hope its sounds like a jet when it spools up
Last edited by TWOLOUDNPROUD; 09-04-2007 at 06:29 PM.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
no doubt about!!! have you considered to make a TwinTurbo one day? like small one charge the big one? Because it might take some time before this one starts to spool...That what i hopingit will do.And i hope its sounds like a jet when it spools up
Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...
My Build Thread
So how long are you going to lay low with the turbo? I speak for all that we want it installed and running, dyno results and vids of poor mustang owners scratching heads.
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
just dont kill those rare b20a gearboxs and make them rarer than they allready are!! lol ive allready just about fucked mine and im running N/A
i am having a Adapter Plate made for i can use a GSR trany on my b20a.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
hey, if the dsm crowd can do it with engine running same technical specs (2.0l dohc 16v turbo), i don't see why we can't.dude lol can the 3gee's exhaust power that lol ? what are you trying to do race the local mustang owner's club
looks sweet, tommy. can't wait to see those 11 sec time slips.
Here a B20a prelude spanking a mustangdude lol can the 3gee's exhaust power that lol ? what are you trying to do race the local mustang owner's club
http://www.youtube.com/watch?v=pCjgv2fldQY
and one more
http://www.youtube.com/watch?v=3X_ZE...elated&search=
Last edited by TWOLOUDNPROUD; 09-04-2007 at 11:01 PM.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
fucking awesome maaaaaaaayte go hard. if urs suceeds ill turbo mine
It will be in next year. I am havung major surgurey in a couple months so i am not in any hurry.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
nice turbo....................what do you think youl get out of it?
Posting Permissions
Reply With Quote
Bookmarks