Results 1 to 9 of 9

Thread: Anyone have a crank pulley that would fit an 81 accord?

  1. #1
    DX User nichodawg's Avatar
    Join Date
    Aug 2007
    Location
    Miami, Fl
    Posts
    17

    Anyone have a crank pulley that would fit an 81 accord?

    Hi All, Im new to this.
    So basically what I have is and 81 accord lx that I have owned for 11 years now, and has been my backup car for years now. I just replaced about EVERYTHING under the hood over the last few months.
    So my crank pulley was super wobly after driving it for a few days after the whole engine was replaced, So I take the pulley off, and its missing about 2 mm of the hub!

    To make a long story short, I have looked EVERYWHERE for a new one, and have had little success. I'm driving on a new pulley from honda, but its missing the power steering belt seating on it.

    Does anyone know where I can find a good used one that is not worn down???? Thanks in advance!



  2. #2
    2ndGenGuy
    Guest

    Re: Anyone have a crank pulley that would fit an 81 accord?

    I MIGHT be able to score one for you. I know where there is an EK1 engine sitting in this dude's yard from an 81 LX. I don't know how good it is, but I'm going to go nab a valve cover and upper timing cover from it. It will be some time this week, and might be interesting getting the pulley off.

  3. #3
    DX User nichodawg's Avatar
    Join Date
    Aug 2007
    Location
    Miami, Fl
    Posts
    17

    Re: Anyone have a crank pulley that would fit an 81 accord?

    Man that would be so awesome! is there anything that you might need? I have lots of ek1 parts sitting around?

  4. #4
    LX User xvok's Avatar
    Join Date
    Jun 2007
    Vehicle
    83 accord honda hatch
    Location
    olympia WA
    Posts
    212

    Re: Anyone have a crank pulley that would fit an 81 accord?

    i will accept parts for john oil pan plz

  5. #5
    2ndGenGuy
    Guest

    Re: Anyone have a crank pulley that would fit an 81 accord?

    Damnit! I forgot to go to that guys house today. I don't know why I didn't think to do it. I will head out there tomorrow. Hey xvok, if you come with me out there, we can steal the oil pan off of that motor for yours. I didn't even think about it until now. So we can go get:

    Valve Cover and Upper Timing Cover for Offthahook
    Crank Pulley for Nichodog
    Oil Pan for Xvok

    If the Oil pan from the '81 EK1 won't fit on the '82 EK1, then I might be willing to trade Nichodog for that crank pulley, if you've got an '82 EK1 hanging out.... Then we've all got the EK1 parts we need.

  6. #6
    2ndGenGuy
    Guest

    Re: Anyone have a crank pulley that would fit an 81 accord?

    Okay good news. I went over there and got all the parts. The crank pulley is a little rusty because it's been sitting outside, but I think you could probably clean it up. I got all the other parts too. W00t!

  7. #7

    carotman's Avatar
    Join Date
    Jul 2000
    Vehicle
    89 Accord LX/B20A | 87 Accord Hatch "S" Stock | 94 Civic Hatch CX
    Location
    Montreal South Shore
    Posts
    9,984

    Re: Anyone have a crank pulley that would fit an 81 accord?

    Just grab the whole engine

    http://pages.videotron.com/omus
    3geez member since July 12 2000

    I need these parts!
    https://www.3geez.com/forum/showthread.php?t=67742

  8. #8
    SEi User
    Join Date
    Apr 2002
    Vehicle
    81 HB LX, 84 HB S, 89 LX-i Coupe
    Location
    Indianapolis, IN
    Posts
    1,453

    Re: Anyone have a crank pulley that would fit an 81 accord?

    Once again, 2ndgenguy comes through in the clutch. He would get that whole engine, but I think he is out of space to store stuff. I guess he could spread a tarp open on his bedroom floor and gain some storage space that way...

  9. #9
    2ndGenGuy
    Guest

    Re: Anyone have a crank pulley that would fit an 81 accord?

    Quote Originally Posted by offthahook View Post
    Once again, 2ndgenguy comes through in the clutch. He would get that whole engine, but I think he is out of space to store stuff. I guess he could spread a tarp open on his bedroom floor and gain some storage space that way...

    Hell, I live on 2 1/2 acres. I should just toss it out in the field behind the creek... Seems to be what a lot of people do! Like the guy I was snaggin' parts from!

Similar Threads

  1. Crank Pulley
    By Hick in forum 2geez Tech & Performance
    Replies: 11
    Last Post: 03-13-2010, 06:49 AM
  2. crank pulley
    By john in forum 3geez Accords
    Replies: 17
    Last Post: 06-30-2005, 10:14 PM
  3. Crank pulley came off!!
    By Strugglebucket in forum Classic Honda Community Chat
    Replies: 8
    Last Post: 06-29-2004, 03:58 PM
  4. Crank Pulley
    By damnthesenames in forum 3geez Accords
    Replies: 5
    Last Post: 02-22-2004, 08:05 AM
  5. Help can't get crank pulley off!!!!!
    By kevins89lxi in forum 3geez Accords
    Replies: 22
    Last Post: 08-24-2003, 07:17 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink