I followed these steps in the chilton's repair manual.
1. disconnect negative battery cable.
2. remove upper strut cover from inside the vehicle and remove upper strut retaining nuts
3. block wheels and looses lugs.
4. raise and safely support the rear of the vehicle
5. remove rear wheel
step 6 is to remove the strut mounting bolt and remove the strut. I held the nut on the end of the mounting bolt and spun the bolt. It cracked loose and spun. I continued loosening the bolt from the nut waiting for the bolt to come free of the nut. It will not turn free of the nut. The bolt continues to spin with the nut held in place but will not come free of the strut. What should I do now?
Bookmarks