throttle body and intake

[import racer]

hey guys just wondering would the throttle body and intake off a 90-93 accord fit my 88 exi.just looking for some easy performance upgrades.i alreadyknow about the 4g map sensor and injectors,is there anything else that would help.

[MessyHonda]

just the throttle body would fit i think its 2mm bigger...but they could be the same size

[A18A]

you would also need to bore the plenum

[LiTtLe xOx BitT]

I have a B18 intake manifold/fuel rail and TB thats modified to fit the A20 head, let me know if your interested.

[bobafett]

yeah its already been mentioned, but a 4g tb will work, but not for much gains. you can get real gains by buying a b16/b18c5 intake manifold (aebs is inexpensive) and a large aftermarket tb.

but together that will probably cost $500 ish and the manifold will take a bit of modding, and you will need to create a new throttle cable bracket (easy easy).

but it all depends on how far you want to mod the car. if you just plan on bolt ons there are probably better places to spend your $500 first. depending on the mods you have now.

here is one on ebay (i paid 130 shipped brand new, so be careful)
http://cgi.ebay.com/ebaymotors/B16-B...QQcmdZViewItem

and a nice TB from ebay
http://cgi.ebay.com/ebaymotors/Edelb...QQcmdZViewItem

good luck man

[import racer]

thanks guys,trying to keep cost down.don't have alot to spend right now,thats why i'm looking at bolt ons from other hondas.