I just picked up sei rear brakes for $110 from the local junkyard......they wanted me to pay for every single part they could list on the computer, so I took out the trailing arms, calipers and brackets, rotors, brake lines except sei rear hard lines, I tried to get the upper control arms too but gave up. They charged me for the hubs and spindles, dust shields, control arms, adapter brackets, and e-brake cables. I also got the proportional valve so I'm soon to be in the 11" rears club..
Yay, if you need any help pm me.
still looking for these :/
Originally Posted by knarg
Keep looking
i saw an se-i on the junkyard. but its in fremont...like a 3 hour drive to you.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
there are a couple of acura vigors here if anybody is interest in some sway bars..
yeah i could maybe find one in sac, but need to actually be there first. and then look harder.
Good luck. The install all together, by myself, without knowing how it's done, took about 6 hours. Probably the best upgrade i ever did.
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
if your lucky, the chassis and suspension are in good condition with no rust, then its pain free...no breaker bar needed for me...
thats the good thing about about bay area cars....when i took out the suspension off a car in san jose i took it off with simple hand tools.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Not here....
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
theres a prelude si at my junkyard, will the rear discs work?
no
No, Only the Rears from a 1989 Accord SE-i Will work
2004-2011?
Posting Permissions
Reply With Quote
Bookmarks