right, hopfully this one worked
sould be my cam cover back on the motor
sorry bout the size guys, still havnt figured how to shrink them down
sould be my cam cover back on the motor
sorry bout the size guys, still havnt figured how to shrink them down
Last edited by Hauntd ca3; 08-25-2008 at 02:04 PM.
swet. lucky we have broadband
cheers for the help aaron
am wrapped can do that now eh
found rear shock bushes
ef civ ones are just bout identical
only the crush tube is diff and only needs trimming by bout 3/4 mm each end
have some frunt uca urethane bushes on order aswell
only like $40 for both sides
now can do it will post pics as i get the in
and i run vista fuck it all
old pc had xp but the motherboard went poof and got this one with vista premium given to us
so will i need a vista photo resizer or is that one you mentioned compatible with vista?
what kind of header is that?
and no homo jokes but how long is your dipstick...lol
seriously, my B20 is missing the dipstick and I see yours appears to be missing.. I was going to use the A20 dipstick but with 4 qts it still reads short.
they are made by autobend here in nz
for a poolude si and 4-1 with 2.25 inch collector down below sump gasket level.
dip stick is there, just behind the cc cable which will go in the bin today i think
will check the measurement and get back to you later
dip stick is bout 320mm from where the rubber seat sits on the dip stick tube to the high mark and prob nutha 15-20 mm to the end of the stick roodoo
vista should have its own image resizer. i suggest you PM forrest89sei he knows all about windows pissta
heres one of my nice straight bonnet
that wee dip at the front of the bonnet bulge took friggen ages to get right
agian sorry bout the size
hope you all have a good broadband connection so it dont take to long
Last edited by Hauntd ca3; 08-25-2008 at 09:54 PM.
sweet!
1988 Honda Accord LX-i Coupe 123k miles.
good good i recon.
now for the nasty bit
this is guna cost a few bucks to get done, but the guy doin it is an absolute friggin artist
i remember i had a rust hole like that, i just rivited a piece of metal behind it and stuck body filler over it, though that was just to get a wof, i didnt really care lol. getting it done properly is always good
i still remember that hahaOriginally Posted by A18A
1988 Honda Accord LX-i Coupe 123k miles.
i have a rust hole the same as that but guess wherre it is?? on the INSIDE where no water can get to it. talk about cheap japanese shit metal fault lol
But wait... theres more!
the old girls had a punt in the back some time in its life and this is the result.
is a bit along the bottom of the boot opening aswell and int the lh front door under the bump strip
damn you have rust up there? never seen that lol but some of the cars i have seen allways have dents up there.
even my car has rust done the bottom thats not fixed yet lol
looky what i got today
have some rear shock bushes for a ef civ at work am modding to fit aswell
man those look nice~!
What happened to my pic?
was there last night!
nice urethane front uca bushes
of course 5 min later they show up.
that dam server must be on the fritz gain
you eatin at the computer gain matt
Last edited by Hauntd ca3; 08-28-2008 at 04:35 PM.
actually managed to get something done today
horrible old curbed wheel
nice better lookin wheel
just gotta give it a few coats of colour and clear it
then only 5 more to go
cool! I was gonna paint my wheels today too, but i didnt have any paint lol
5 more coats?!? I hope you dont curb it again :P
five more wheels
just chucked a few coats of primer and a few of the same grey as the one below.
so four more wheels to get to this stage.
cool. and yes it reminds me ti paint my wheels on my gfs car. one dau i guess. good to see you have done some work on the beast
Posting Permissions
Reply With Quote
Bookmarks