Sins PGMFI Bin's DataBase is gone how about we start one here for OBD-0 & 1 it would be nice to have fresh bin's to work with and a test section for bin's that other members have mod and for others to try out.Tell me what you guy's think about this.
OBD-0&1 Stock Bin's DataBase
Sins PGMFI Bin's DataBase is gone how about we start one here for OBD-0 & 1 it would be nice to have fresh bin's to work with and a test section for bin's that other members have mod and for others to try out.Tell me what you guy's think about this.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Last time I checked they weren't gone, just harder to find. But that was a few months ago.
Bump
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
I've got my bins and justins one he sent me. None of them have been fully tuned though.
Ill have a Tuned bin soon ... Unfortunately .. i will NOT have stock timing maps .. I may be able to pull them from a PJ0 .bin though .. we shall see.
A PJ0 ecu does not have timing maps.
.... no ? .. ahh .. vaccuum advance. .. why didnt i think of that?
Yeah, its going to have to be done all from scratch unfortunaly. The p75 values are close enough to run the motor though.
Honestly, ANY maps will run the motor, P28, P06, P05, PR4, P72, P75 .... etc. They will ALL run the engine, just make different amounts of power at different RPMS.
I dont have an EGT sensor, so, Timing tuning on this car isnt gonna be TOO nice .. but ill flat rate the timing maps via someone shooting a IR Temp guage at it. haha ... we shall see what happens. -- good thing hes got that nice header now
Since the engine is a 2.0, it will probably be able to handle a little more timing than the 1.8 liter.
Last edited by rudeludenotmean; 10-07-2007 at 04:32 PM.
Posting Permissions
Reply With Quote
Bookmarks