Page 2 of 33 FirstFirst 12345612 ... LastLast
Results 26 to 50 of 816

Thread: 4g distributor adapter for obd-1 conversion

  1. #26

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: Blueprints?

    I'm very interested. Let me get back to you when I get my model back from this tool...
    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.



  2. #27
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    Quote Originally Posted by sb_hbackDX View Post
    Ah bike carbies! What size MM bore are they? I have some 39mm Mikuni's...So your making a intake flange for them? I made my setup using the old EFI intake manifold...it was a bitch. Good luck tuning those things...mine were a blast haha Do you have any pictures of the flange your making? I may decide to get one from ya so I can re-weld everything correctly this time.


    PS get yourself a wideband O2 sensor...
    Forgot the bore size. Looks like the guy i ordered them from just shipped the today. I'm making alluminum flanges that will match up to the carbs and the
    head then weld in some aluminum piping, probably around the same size as the bore of the carbs. After the intake is assembled ill probably bead blast it ( makes it looks forged, Kinda).And maybe oxidize it red or black or something.

  3. #28
    DX User sb_hbackDX's Avatar
    Join Date
    Mar 2005
    Vehicle
    1986 Honda Accord Hatchback...looks are deceiving :D
    Location
    New Iberia/Lafayette, Louisiana
    Posts
    78

    Re: Blueprints?

    Ah I see, your practically mounting them directly to the head...how long will your runners be, if any? My set-up has long runners, about 7-8'' long from carb to head...Sounds like a nice project, how much will all this cost?

  4. #29
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    Quote Originally Posted by sb_hbackDX View Post
    Ah I see, your practically mounting them directly to the head...how long will your runners be, if any? My set-up has long runners, about 7-8'' long from carb to head...Sounds like a nice project, how much will all this cost?
    Haven't decided how long yet, still waiting on the carbs to get here. But the manifold wont cost me anything to make( its all coming out of our scape bins). So just the price of the carbs them selfs. Should have the manifold done within a week after i get the carb in. Should be fun!

  5. #30
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    Quote Originally Posted by LX-incredible View Post
    I'm very interested. Let me get back to you when I get my model back from this tool...
    Any news yet?

  6. #31

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: Blueprints?

    I don't really know the correct way of going about this, but the measurements have been triple-checked. Please forgive the quality, the scanner took a dump...

    Front:


    Rear:


    Cross-section:

    The 0.62" at top left is actually 0.35", 1.42" below it should be 1.15". 1.1" should be 1.12". 1.21" is incorrect.

    Last edited by LX-incredible; 12-11-2007 at 09:23 PM. Reason: Incorrect measurements fixed, once again.
    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.

  7. #32

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: Blueprints?

    Fixed.
    Last edited by LX-incredible; 11-01-2007 at 08:27 AM.
    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.

  8. #33

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: Blueprints?

    use the microsoft image resizer powertoy. its ftw

  9. #34

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: Blueprints?

    I'm thinking that it would be best to seal the water passage with a D-ring. The slot is 0.1" in depth, so H. should be drilled to a depth of 0.5" or so, instead of all the way through.

    Here are the measurements:


    I'd like to do the same around the cam hole, but first need to find a suitable o-ring.
    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.

  10. #35
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    I have to say good job on the dimensions.
    Just need a few more, probably some of the hard ones to get.

    I need the lengths of the straight lines and radiuses of the arcs of the outer perimeter. Also it would help to get the total size of the part..





  11. #36
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    oh yeah how thick is it?

  12. #37

    Sabz5150's Avatar
    Join Date
    Apr 2002
    Vehicle
    1989 Accord SE-i coupe
    Location
    Richmond, VA
    Posts
    3,069

    Re: Blueprints?

    Got a CNC lathe at your disposal perchance? My shop's insanely tied up with work and I'd love to see some custom SS valves. I should be able to supply full dimensions, too.

    Yeah, I know... SS has shot up through the friggin roof recently.
    My collection: Stay tuned! (04/02/2009)

    Quote Originally Posted by bobafett View Post
    glorious!

    imagine a beowulf cluster of tho... oh wait... its sabz. how is the beowulf cluster of myth boxen treating you?

  13. #38
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    Quote Originally Posted by Sabz5150 View Post
    Got a CNC lathe at your disposal perchance? My shop's insanely tied up with work and I'd love to see some custom SS valves. I should be able to supply full dimensions, too.

    Yeah, I know... SS has shot up through the friggin roof recently.
    Got access to two one at mine and one at my girlfriends dads shop.

  14. #39
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    so this is what it looks like so far.



    Don't worry the center pieces wont be there.

  15. #40

    2drSE-i's Avatar
    Join Date
    Dec 2004
    Vehicle
    1989 Honda Accord SE-i Coupe
    Location
    Oklahoma City
    Posts
    5,283

    Re: Blueprints?

    lookin good man, i may be interested in one of those too so dont throw away the specs when your done with him haha :-)
    '89 SE-i Coupe
    Awaiting Garage
    Quote Originally Posted by AccordEpicenter View Post
    its better to be retarded than advanced

  16. #41

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: Blueprints?

    Looking good!

    It is 7" wide x 6.35" high and 0.75" thick. I got what I could for the straight lines, but I don't think it's in my abilities to get the radiuses of the arcs... Really the shape doesn't matter all that much. All we really need to worry about is keeping the right angle in the lower left corner and that indentation below C.

    A line through C. and D. hits the water pipe dead-center. The water pipe is 0.72" in diameter. An arc with a radius of 0.45", centered on this line should do nicely.

    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.

  17. #42
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    ok here is what i got. the only thing u cant see in the images is the angel for the water port( can kinda make it out in the wireframe)




    Did you want O'ring groves cut in the this too. Let me know. other wise i think were almost ready to run it. Also if you wanna see the actual code i can post it too,

  18. #43

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: Blueprints?

    Wow, nice work! I think the o-ring grooves would be a good idea. I'm going to find one to fit around the dizzy hole and get back to you with the measurements. Do you have what you need for the D-ring?
    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.

  19. #44
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    Quote Originally Posted by LX-incredible View Post
    Wow, nice work! I think the o-ring grooves would be a good idea. I'm going to find one to fit around the dizzy hole and get back to you with the measurements. Do you have what you need for the D-ring?
    did you want the grove .1000 deep? And on both sides?

    Oh yeah MSC sells like every o'ring you can think of.
    http://www1.mscdirect.com/cgi/nnsrhm?KNC-T7L391316886
    Last edited by crucial; 11-02-2007 at 11:57 AM.

  20. #45
    SEi User ZackieDarko's Avatar
    Join Date
    Aug 2005
    Posts
    1,910

    Re: Blueprints?

    wait you are making the adpater plate needed to run a 4g dist for an OBD-1 swap? is that what im gathering from this?

  21. #46
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: Blueprints?

    Quote Originally Posted by ZackieDarko View Post
    wait you are making the adpater plate needed to run a 4g dist for an OBD-1 swap? is that what im gathering from this?


    where have you been Zack?

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  22. #47

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: Blueprints?

    0.1" deep on the back side only. A 1 7/16" ID x 1 11/16" OD x 1/8" thick o-ring will do the trick. Let's do the same around the dizzy hole as the water jacket, 0.09" lip and 0.15" groove.

    Any suggestions on o-ring material?

    http://www1.mscdirect.com/CGI/N2DRVS...00000034281040
    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.

  23. #48
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    Quote Originally Posted by LX-incredible View Post
    0.1" deep on the back side only. A 1 7/16" ID x 1 11/16" OD x 1/8" thick o-ring will do the trick. Let's do the same around the dizzy hole as the water jacket, 0.09" lip and 0.15" groove.

    Any suggestions on o-ring material?

    http://www1.mscdirect.com/CGI/N2DRVS...00000034281040
    "A 1 7/16" ID x 1 11/16" OD x 1/8" thick"
    Is this for the dizzy hole? If so do you want it on the top and bottom? Right now the program has the d'ring and the o'ring on the bottom.

    heres what the bottom looks like with out the bolt holes

  24. #49
    LX User crucial's Avatar
    Join Date
    Sep 2007
    Vehicle
    1988 Honda Accord LX
    Location
    Reno, NV
    Posts
    171

    Re: Blueprints?

    About the o'rings i found this info on Viton

    "VitonŽ fluoroelastomer is the most specified fluoroelastomer, well known for its excellent (400°F/200°C) heat resistance. VitonŽ offers excellent resistance to aggressive fuels and chemicals and has worldwide ISO 9000 and ISO/TS 16949 registration."

    MSC sells a pack of 50 for $30.16

    Kinda pricey when you look and the neoprene, silicone, epdm and buna-n.
    Main thing to look for is heat and chemical resistance.

  25. #50
    SEi User ZackieDarko's Avatar
    Join Date
    Aug 2005
    Posts
    1,910

    Re: Blueprints?

    Quote Originally Posted by MessyHonda View Post
    where have you been Zack?


    lolz under the d-series.org rock i guess


    and for the o-ring choice


    you pay for what you get...personally i would rather fork over a few extra pennies for high quality stuff that i know will NEVER even give me a chance of leting me down

Similar Threads

  1. help! Hitachi distributor and/or module and/or a conversion
    By senor honda in forum 3geez Accords
    Replies: 15
    Last Post: 02-19-2013, 02:03 PM
  2. distributor conversion?
    By stocklxi in forum Restoration & Custom Fabrication
    Replies: 10
    Last Post: 10-07-2007, 01:50 PM
  3. CARB TO EFI / EFI TO CARB Distributor Conversion
    By A20A1 in forum Carburetor Tech
    Replies: 3
    Last Post: 08-29-2006, 06:08 PM
  4. distributor conversion questions
    By mouchyn in forum Performance
    Replies: 9
    Last Post: 11-17-2004, 10:44 PM
  5. Replies: 3
    Last Post: 09-06-2003, 01:03 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink