so on the way home we noticed the car got alot louder today i lucked under the car and found out my muffler clamp broke DAMIT
lucky my wire held it up
a quick shot of my crappy pipeing {yes its sagging real low}
and how a errrr fixed it
i got
i hate muffler
so on the way home we noticed the car got alot louder today i lucked under the car and found out my muffler clamp broke DAMIT
lucky my wire held it up
a quick shot of my crappy pipeing {yes its sagging real low}
and how a errrr fixed it
i got
1988 Honda Accord LX-i Coupe 123k miles.
im not even going to say anything
lol nice. you shouldve seen the fix I did to my exaust before I had mufler brothers redo it lol I have autozone pipes and clamps from the exuast manifold pipe all the way to the muffler oh I accidently cut out the flex pipe and it all fell apart lol
ahhahahahhahahahahaOriginally Posted by labeledsk8r
u shoulda sold it for $600 already
You forgot to put that pepsi can in there with some hose clamps. (right before the muffler)
.
USDM Ghetto Tyte Y0!
2004-2011?
hehe
1988 Honda Accord LX-i Coupe 123k miles.
I've done that for a quick fix
I TOLD you that you needed to replace those muffler bearings before they failed.
It could be worse.
A number of years ago I had just left work driving my old 1968 ford F250 pickup and crossed some train tracks and a block or so later ran over a muffler laying in the road that I did not notice before hitting it.
I remember saying out loud (no one else in the pickup cab) what idiot left a muffler in the road.....
A few blocks latter.....
Why is this pickup making so much noise.....
Stop look under pickup and find that I was dragging the front of my tail pipe on the road.....
Ok, wire the tail pipe up and proceed home all the way grumbling about the stupid idiot who left the muffler on the road that I obviously caught my exhaust on.....
Go to auto parts store in the Honda to by a new tail pipe......
Remove remains of old tail pipe....
Start to install new tail pipe.....
Only then realize.....
Oh crap!!!! Yup, that was stupid!
Get in Honda and go retrieve old muffler laying on the side of the road where I ran over it....
Go to auto parts store again and buy new muffler.
Humbly install new muffler and tail pipe on Ford pickup.....
Must have been really long day at work!
They can have my Accord when they pry the steering wheel from my cold dead fingers.
77 accord hatch 79 - 85
82 accord LX hatch 85 - 87
89 accord LXI sedan 89 - 09
09 accord EX-L V6 w/Navi sedan 08 -
My garage
::edit:: nvm still cant say anything lol
Last edited by labeledsk8r; 10-23-2007 at 01:04 AM.
dude i would ship you my parts car muffer if you need it.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
oh hell yeah, that would be chevrolet part number 00015A if you can't find a pepsi machine.
I dont have a muffler at all back there, just used a pipe to a resonator tip, very small..
When I first got the accord I was riding along and all of the sudden the whole car just jumped up in the back and it got real loud.. looked in the rearview and there was something in the road. A POS honda muffler.
[IMG][/IMG]
Last edited by 2oodoor; 10-23-2007 at 08:10 AM.
roodoo2 straight pipin' it! Hardcore!!
Funny my muffler began rusting off in the same spot. I ripped it the rest of the way off and left it that way for a couple weeks while I drove around with the noisy and backfiring. It was fun and loud, but it was killing me. Had to get a new system built...
How loud is yours roodoo?
we have a civic with a straight small stock pipe and fuck it sounds gay. like a fat woman farting continuously. but it has no tip and the stock 1.something inch pipe right through with only a cat.
im glad we have a welder now. new exhausts ftw
cool that looks alot like the one at the junk yardoh hell yeah, that would be chevrolet part number 00015A if you can't find a pepsi machine.
I dont have a muffler at all back there, just used a pipe to a resonator tip, very small..
When I first got the accord I was riding along and all of the sudden the whole car just jumped up in the back and it got real loud.. looked in the rearview and there was something in the road. A POS honda muffler.
[IMG]
i need to get $10 so i can go get it
1988 Honda Accord LX-i Coupe 123k miles.
you should glue it back on with that muffler glue you had all over the rest of your exaust system.
muffler bondo ftw!!
2ndGG I have a 24 inch smitthys just past the flex pipe, it isnt loud , it sounds like a poorshe? lol
It sounds way cool in parking decks because it sounds like duals from the drivers seat
cah,did the original clamp break,or the aftermarket custom coat hanger hanger break? if you want a proper custom coat hanger, you have to get the special muffler stainless steel version racing hanger. the only place to find these are at the proper redneck garages. you can usually identify these by the chewing tobacco sign,bigger then the building, outside. they will normally have a non functional rusted lift, and someone selling boiled peanuts and maters(tomatos). for around twenty bucks,they will install one of the special for mentioned racing coat hangers, the good shops will even throw in a free budweiser can/bailing wire patch. make sure they offer at least a five mile/twenty minute warranty. and buy some peanuts,it makes their day.
I've done that for a quick fix
quick fix? shit...at work the exhaust on the forklift is more soda can than actual piping
OMG Lostforawhile dont give away all our secrets, we may need to make some money one day
I have wired up header mufflers on camaros and pickups more times than I want to mention.. lol
they dont make coat hangars like they used to, they are like pot metal almost now, they pop and snap, used to be able to weld wtih them..not anymore.... lol
true redneck gets the parts from feed and seed shack..
I get my parts wherever i can find 'em.OMG Lostforawhile dont give away all our secrets, we may need to make some money one day
I have wired up header mufflers on camaros and pickups more times than I want to mention.. lol
they dont make coat hangars like they used to, they are like pot metal almost now, they pop and snap, used to be able to weld wtih them..not anymore.... lol
true redneck gets the parts from feed and seed shack..
I have a buddy who is on his third car and none of them had mufflers...
first MK1(?) '87 MR2..rusted holes in pipes
second '89 F-150 We decided to cut open his muffler remove the baffling and weld it back together...we got the baffling out, but welding was another story (this was a few years ago)...Oh well ended up with a cherry bomb that was Highheat tapped on until it fell off.
'83 280zx...Muffler was in the trunk to start...I welded it on with some remnace from his truck, and coat hanger...he took it to get inspected...bought it back, and ripped it back off lol.
Dark Accords set up looks like something we would have done to my buddies car for a quick fix...and would left it until if fell of like so also...haha
'91 Kawasaki ZX600c =D
'89 Accord DX A20a1 5spd
'68 Ford Galaxie XL 396ci-Fe C6
'07 Mazda 6 2.3L 5spd
anyway.. your post was funny as eightch- ee double hockey sticks .
good stuff
Posting Permissions
Reply With Quote
Bookmarks