Results 1 to 20 of 20

Thread: help please... im stumped

  1. #1
    DX User
    Join Date
    Mar 2007
    Vehicle
    1987 Honda Accord LX-I Hatch
    Location
    Ewa Beach, HI
    Posts
    43

    help please... im stumped

    I have an 87 accord lx-i hatchback and it recentley started to squeak a lot... here are some of the symptoms...
    Does not sqeauk at idle... starts to sqeak at about 45 mph... stops squeaking when it goes under 45 or so...
    Just replaced calipers, rotors, and brake pads...
    Seems to be related to the vehicles speed.... when I speed up... the squeaking speeds up as well
    Squeak seems intermittent... it goes away and comes back
    If you guys could give me some advice... that would be cool
    I was thinking maybe drive belts... but the sqeak is not at idle...
    Then I thought wheel bearings... but they tend to growl more than sqeak...
    I dont really know what else it could be... any help would be appreciated... thanks



  2. #2
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: help please... im stumped

    might be the exhaust heat shield rubbing against the exhaust pipe, making it squeek

  3. #3

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: help please... im stumped

    could be brake dust guard, they tend to do that if u bend them

  4. #4
    2.0Si User labeledsk8r's Avatar
    Join Date
    Oct 2005
    Vehicle
    94 accord DX coupe , 89 LX (R.I.P) , 89 LX-i Coupe (sold)
    Location
    ocala FL
    Posts
    2,567

    Re: help please... im stumped

    Quote Originally Posted by wohdog View Post
    could be brake dust guard, they tend to do that if u bend them
    well if the sound is comeing fro mthe wheel area then this sounds like it could be it since you just were doing wheel and brake work, check that out. if its more a under car or engine bay noise check exhuast and heat sheild and even engine mounts, also check your suspension bushings

  5. #5
    DX User
    Join Date
    Mar 2007
    Vehicle
    1987 Honda Accord LX-I Hatch
    Location
    Ewa Beach, HI
    Posts
    43

    Re: help please... im stumped

    i thought it was the dust shield too..;. so I toook it off... still squeaks... Ill try the heat shield next... thanks for the help

  6. #6
    itzdave's Avatar
    Join Date
    Jul 2006
    Vehicle
    1990 Mazda Miata
    Location
    Missoula, Montana
    Posts
    1,869

    Re: help please... im stumped

    do you know where the sound is coming from? front, rear, left, right? could it be a bushing or something. my rear end makes a squeaky sound ever since i lowered it.

  7. #7
    SEi User knarg's Avatar
    Join Date
    Jun 2007
    Vehicle
    '04 Forester 2.5XT
    Location
    Fort Collins, CO
    Posts
    1,256

    Re: help please... im stumped

    yeah my rear end squeaks, ever since i swapped to koni and ground control.

  8. #8
    3Geez Veteran russiankid's Avatar
    Join Date
    Nov 2005
    Vehicle
    1989 Honda Accord LX 5-speed, 1995 BMW 525i 5-speed
    Location
    Pennsylvania
    Posts
    4,929

    Re: help please... im stumped

    It quiet possibly could be the wheel bearings. One of my wheels bearings was squeaking at times, very annoying. It would come and go whenever it decided to.
    Sam


    1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner

    Current:
    2014 Elantra Sport 6MT
    2000 Montero Sport 4x4 (beater, trail rig)

  9. #9
    SEi User Demon1024's Avatar
    Join Date
    Apr 2007
    Vehicle
    86lxi hatch auto 87lxi hatch auto 88 lxi hatch 5-speed 96 sedanex 5-speed 88 carb coupe 88 sedan carb
    Location
    NW Arkansas
    Posts
    1,088

    Re: help please... im stumped

    It doesn't squeak at idle motion at any rpm? Notice what rpms you are doing when it squeeks then try increasing rpm "slowly" at idle see if it does it. Or get your car up on some blocks and run the engine up to 45mph (getsomeone to help) and look for noise,but not to close to the moving parts/OR under it for that matter. Or i could be what someone said that a shield is loose or something is rattling but it's at a constant 45 or is it varied?

    "Weight is relative to power like time is relative to speed"

  10. #10
    DX User
    Join Date
    Mar 2007
    Vehicle
    1987 Honda Accord LX-I Hatch
    Location
    Ewa Beach, HI
    Posts
    43

    Re: help please... im stumped

    i think it might be the wheel bearing too... it is really annoying and its coming from the front driver's side area... it comes on just as I am hitting 45... its not related to rpms... its is related to vehicle speed... too bad these wheel bearings are a bitch to change

  11. #11
    itzdave's Avatar
    Join Date
    Jul 2006
    Vehicle
    1990 Mazda Miata
    Location
    Missoula, Montana
    Posts
    1,869

    Re: help please... im stumped

    what kind of squeaking sound does it make, short repetitive, chirping, high pitch, low pitch. are you tires balanced? maybe your strut is starting to go out. does it happen more/worse when you hit bumps or a bumpy/not smooth part of the road?

  12. #12

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: help please... im stumped

    Where does it sound like it's coming from? Could it be the speedometer cable?
    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.

  13. #13
    DX User
    Join Date
    Mar 2007
    Vehicle
    1987 Honda Accord LX-I Hatch
    Location
    Ewa Beach, HI
    Posts
    43

    Re: help please... im stumped

    it is a high pitched chirping sound....
    and it cant be my speedo cable... i just lubed it up yesterday and it still makes the noise...
    it cant be anything whistling...
    I jacked up my car this morning and got the speed up to about 40 and it still started to squeak... im starting to lean more towards the wheel bearings...

  14. #14

    LX-incredible's Avatar
    Join Date
    Sep 2006
    Vehicle
    88 LX-i Coupe Twins/89 SE-i Coupe/88 Suburban
    Location
    Tucson, AZ
    Posts
    2,495

    Re: help please... im stumped

    Did you have the noise before you worked on the brakes? If you used pad shims, I would check that they are still in place, and not dragging on the rotor. It is also possible, but unlikely that wear indicators were damaged bringing them too close to the rotor.
    88 LX-i coupe auto (241K DD), 88 LX-i coupe 5-speed, 89 SE-i coupe auto.
    Quote Originally Posted by stat1K View Post
    who is tim and where can i get naughty pictures of him?
    CARDONE SUCKS.

  15. #15
    itzdave's Avatar
    Join Date
    Jul 2006
    Vehicle
    1990 Mazda Miata
    Location
    Missoula, Montana
    Posts
    1,869

    Re: help please... im stumped

    is the sound rpm specific. (ex. 45mph in 5th gear vs 45mph in 4th or 3rd, does it matter?) does it only happen if you are accelerating/cruising or if you take it out of gear or brake does it still happen? does the steering wheel vibrate or shake? sorry to ask so many questions, it could just help to pinpoint what might be causing it.

  16. #16
    DX User
    Join Date
    Mar 2007
    Vehicle
    1987 Honda Accord LX-I Hatch
    Location
    Ewa Beach, HI
    Posts
    43

    Re: help please... im stumped

    yeah... asking questions is helping me a lot... it helps me to pinpoint the problem myself... it is speed specific... it doesnt matter what gear i am in... it usually just happens when it watnts to... it can be when I am braking accelerating... turning... nothing affects it other than vehicle speed...

  17. #17
    SEi User gp02a0083's Avatar
    Join Date
    Nov 2004
    Vehicle
    1989 Lx-i Hatchback
    Location
    Jackson, NJ
    Posts
    1,838

    Re: help please... im stumped

    im having the same problem myself , for my car it is from the front passenger side, i took my brakes apart and saw no abnormal wear. if its anything like mine its a squeak that speeds up as you do and slows down also, sometimes it gets worse as you slow or at slow speeds, i bent my dust gurad and checked my brakes and nothing is snowing signs of scuffing, from what i get its something with the rotating assembly b/c of the way the sound is. id have to even suspect in your case as well as mine that is the hub bering starting to go.

    1989 Accord Lx-i hatchback (current DD project)
    1986 Olds Cutlass 442 clone (never ending project)
    3Geez resident body man
    Owner of Wreck-less auto body

  18. #18
    DX User
    Join Date
    Mar 2007
    Vehicle
    1987 Honda Accord LX-I Hatch
    Location
    Ewa Beach, HI
    Posts
    43

    Re: help please... im stumped

    I FOUND IT!!!!!! There is a little seal that sits between the axel and the hub flange... I was getting desperate and started spraying silicone everywhere... when I sprayed in that are... the sound slowly started going away... I sprayed some grease (zep2000) on that seal and that dam squeak went away... thanks for the help guys!!!

  19. #19

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: help please... im stumped

    wonder why it squeaked in the 1st place? is ur CV nut tight?

  20. #20
    DX User
    Join Date
    Mar 2007
    Vehicle
    1987 Honda Accord LX-I Hatch
    Location
    Ewa Beach, HI
    Posts
    43

    Re: help please... im stumped

    yeah... the cv nut is tight.... I used a 1/2 impact gun for that...

Similar Threads

  1. this has realy got me stumped
    By fraza in forum 3geez Accords
    Replies: 3
    Last Post: 12-16-2005, 04:18 PM
  2. Having issues, i'm stumped
    By BiGDawG_RTL in forum Carburetor Tech
    Replies: 5
    Last Post: 08-23-2005, 04:09 PM
  3. Help i'm stumped
    By kidato in forum 3geez Accords
    Replies: 5
    Last Post: 05-22-2004, 02:03 PM
  4. Stumped
    By thundertank in forum Carburetor Tech
    Replies: 7
    Last Post: 04-29-2004, 01:19 PM
  5. Stumped!!! Help please.
    By SLCPUNK in forum 3geez Accords
    Replies: 8
    Last Post: 02-04-2003, 08:10 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink